Mark this thread as Unsold
FS[SouthEast]: 65mm Intake Manifold + Throttle Body (Buschur Racing)
#1
65mm Intake Manifold + Throttle Body (Buschur Racing)
Prefer to sell together, but will sell separately. (no core required for either one.)
$335 shipped - Buschur Racing 65mm Intake Manifold. Add $75 if you want to keep the IAT Sensor + Omni 4 bar Sensor. The manifold is speed density ready. The IAT can be removed and plugged with a bolt if you're on a MAF still
SOLD for the Buschur Racing 65mm Throttle body(without sensors) , add $50 if you want to keep the throttle body sensors in place. The throttle plate is coated with Dow Corning Molykote D-321 to help idle conditions by not letting air pass through.
20-30whp increase from installing these units, maybe more depending on your setup.
$75 shipped Omni 4 Bar MAP Sensor
Pictures attached
Any questions?? Private message or text me @ 786-4three6-1012
NEED MORE GO FAST BITS, CLICK HERE ------>https://www.evolutionm.net/forums/sa...ifold-etc.html
]
$335 shipped - Buschur Racing 65mm Intake Manifold. Add $75 if you want to keep the IAT Sensor + Omni 4 bar Sensor. The manifold is speed density ready. The IAT can be removed and plugged with a bolt if you're on a MAF still
SOLD for the Buschur Racing 65mm Throttle body(without sensors) , add $50 if you want to keep the throttle body sensors in place. The throttle plate is coated with Dow Corning Molykote D-321 to help idle conditions by not letting air pass through.
20-30whp increase from installing these units, maybe more depending on your setup.
$75 shipped Omni 4 Bar MAP Sensor
Pictures attached
Any questions?? Private message or text me @ 786-4three6-1012
NEED MORE GO FAST BITS, CLICK HERE ------>https://www.evolutionm.net/forums/sa...ifold-etc.html
]
Last edited by Evoryder; Aug 26, 2017 at 04:34 PM.