When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Evo GeneralDiscuss any generalized technical Evo related topics that may not fit into the other forums.
Please do not post tech and rumor threads here.
Sponsored by: RavSpec - JDM Wheels Central
A couple weeks ago a found a module for the Evo X that simulates the weight sensors specific signal and allows you to change seats. so i planned to do a write up on it.
I figured the install would be much more complicated than this but here it goes
Under the passenger seat:
the plug on the left is the one we need to splice into.
on our Module we have 3 wires. Black, Red, Yellow
splice the black and red to the black and red on the plug.
splice the other 4 wires Blue, Green, Yellow, White all into the single yellow wire.
unplug all the weight sensors, or cut that portion of the harness off if you never plan to put it back together.
going on 100 miles without any issues, or weight sensors in the car.
here's the link where i bought it. I have not seen one anywhere else online either. Modomotive.com
