What intercooler is this?
#1
What intercooler is this?
Hey everyone..
i bought this 3.5 inch intercooler off of someone on these forums, and he said it was a Buschur racing intercooler. Literally nothing fits and this is such a pain in the *** to install and havent even finished it because nothing really fit. Was he lying or just BRs design is off.. Please help and thanks!
#4
Evolved Member
iTrader: (38)
What UICP is that? What was that UICP connected to previously? Stock? Another brand IC?
Also from what I can tell in the pic the IC is mounted a bit crooked looks high on the divers side... could just be the picture angle though...
I'd loosen up the entire charge pipe system so everything is loose and adjust all couplers and brackets accordingly you honestly aren't really that far off looks like some adjustments to piping, couplers, brackets, and clamps should have you good to go though I'm not sitting in front of it so it's a lil tough.
Are there spacers for the IC side mounting points on the Buschur kit? A few ETS kits I've installed had spacers at those points.
Also from what I can tell in the pic the IC is mounted a bit crooked looks high on the divers side... could just be the picture angle though...
I'd loosen up the entire charge pipe system so everything is loose and adjust all couplers and brackets accordingly you honestly aren't really that far off looks like some adjustments to piping, couplers, brackets, and clamps should have you good to go though I'm not sitting in front of it so it's a lil tough.
Are there spacers for the IC side mounting points on the Buschur kit? A few ETS kits I've installed had spacers at those points.
#5
What UICP is that? What was that UICP connected to previously? Stock? Another brand IC?
Also from what I can tell in the pic the IC is mounted a bit crooked looks high on the divers side... could just be the picture angle though...
I'd loosen up the entire charge pipe system so everything is loose and adjust all couplers and brackets accordingly you honestly aren't really that far off looks like some adjustments to piping, couplers, brackets, and clamps should have you good to go though I'm not sitting in front of it so it's a lil tough.
Are there spacers for the IC side mounting points on the Buschur kit? A few ETS kits I've installed had spacers at those points.
Also from what I can tell in the pic the IC is mounted a bit crooked looks high on the divers side... could just be the picture angle though...
I'd loosen up the entire charge pipe system so everything is loose and adjust all couplers and brackets accordingly you honestly aren't really that far off looks like some adjustments to piping, couplers, brackets, and clamps should have you good to go though I'm not sitting in front of it so it's a lil tough.
Are there spacers for the IC side mounting points on the Buschur kit? A few ETS kits I've installed had spacers at those points.
The IC hanger did not fit when mounting it.. It was at this wierd angle, so I had to hammer it and it's at like a curve shape now.. Is it suppose to be like straight down?
Trending Topics
#8
#12
Evolved Member
iTrader: (38)
I posted in your other thread as well, I drilled the BR JPipe I had way back when I was still running a stock frame Turbo set up. That line needs to be ran to a boost source. I never liked T'ing anything so I drilled the Jpipe and added a barbed fitting. Make sure you have an air tight seal with the fitting if you go this route, don't want to introduce a boost leak
#13
I posted in your other thread as well, I drilled the BR JPipe I had way back when I was still running a stock frame Turbo set up. That line needs to be ran to a boost source. I never liked T'ing anything so I drilled the Jpipe and added a barbed fitting. Make sure you have an air tight seal with the fitting if you go this route, don't want to introduce a boost leak
Also, can u just drill the hole and screw the fitting in or do you need to do more then that? Sorry, I'm a noob at this
#15
Update: I got the intercooler installed and there were no leaks. The vacuum line is still unconnected, so when I drove it, there was no boost.. The j-pipe was such a b***h to get in there, I'm not taking it out.. So, where can I tee- the line? I bringing it to Iveytune on Tuesday, should I just have them do it?