Baytown 1/4 track 02-18

Subscribe
Feb 15, 2005 | 05:04 PM
  #1  
I called a couple of the club members, but lets try and meet up at the track Friday night. I was thinking about 6ish and we can make some runs, then go grab a bite to eat. I will be there for sure to get a baseline on my car, as well as my brothers MSP. Let me know if anyone is up for a little draggin'
Reply 0
Feb 15, 2005 | 05:34 PM
  #2  
im down imma hit 12s baby
Reply 0
Feb 15, 2005 | 05:35 PM
  #3  
Count me in
Reply 0
Feb 15, 2005 | 05:37 PM
  #4  
Quote:
im down imma hit 12s baby
Reply 0
Feb 15, 2005 | 07:05 PM
  #5  
If the weather holds up I may even show up
Reply 0
Feb 17, 2005 | 08:53 AM
  #6  
Any updates on anybody else?

1. Jon
2. Allen (Mazdaspeed Protege)
3. Andy
4. Paul
5. Jorge
6.????????
Reply 0
Feb 17, 2005 | 09:10 PM
  #7  
I think john is going, what time are we meeting up at sterling? Anyone call mario, howard, jason, and all of them?
Reply 0
Feb 17, 2005 | 09:33 PM
  #8  
we are meeting up at Sterling bank at 5:00PM. Mario and little john are going too. Howard has the flu so he can't make it. (I think he's just afraid to race me at the track)
Reply 0
Feb 18, 2005 | 01:04 AM
  #9  
don't forget to bring your utec cable andy, we don't know a fry's in that area lol.
Reply 0
Feb 18, 2005 | 01:10 PM
  #10  
I'm heading out a bit earlier see you guys there.
Reply 0
Feb 18, 2005 | 01:17 PM
  #11  
Let me know next time you guys go. My cousin runs there on his bike and he's always trying to get me to go. I'll have an excuse next time to make the drive from Austin.
Reply 0
Feb 18, 2005 | 01:49 PM
  #12  
Just gassed up and stripped down the car to race weight =) Roberinaustin we'll let you know. Check on evospeed.net, that's where we post our meetings usually.
Reply 0
Feb 20, 2005 | 06:49 AM
  #13  
Well I see no one has posted up any times yet, so I will be the first.

60' 1.804 <-- Best one for me for the night. Others were 1.811, 1.821, and 1.813
1/4 time 13.10
1/4 mph 104.8

This was my first run. I ended up changing my cam gear settings from 0/0 to -3/-3. The runs were worse from there with a best of 13.3 at 102.3. I found out the next day that I had set the cam gears to +3/+3. This was unfortunate due to the fact I think I could have broken into the 12's. I set them at home to a true -3/-3 and this made a big difference. The car feels really strong up around 5500 to redline.

This is for Andy, Paul, and Phillip:

http://www.nhra.com/tech_specs/ETQuickRef.html

I was mistaken on the helmet rule.
Reply 0
Feb 20, 2005 | 07:02 AM
  #14  
Not bad times at all. We went to SAR last Wednesday and I learned how hard it is to get a good 60ft. time. I'm looking forward to going again.
Reply 0
Feb 20, 2005 | 10:17 AM
  #15  
Quote: Well I see no one has posted up any times yet, so I will be the first.

60' 1.804 <-- Best one for me for the night. Others were 1.811, 1.821, and 1.813
1/4 time 13.10
1/4 mph 104.8

This was my first run. I ended up changing my cam gear settings from 0/0 to -3/-3. The runs were worse from there with a best of 13.3 at 102.3. I found out the next day that I had set the cam gears to +3/+3. This was unfortunate due to the fact I think I could have broken into the 12's. I set them at home to a true -3/-3 and this made a big difference. The car feels really strong up around 5500 to redline.

This is for Andy, Paul, and Phillip:

http://www.nhra.com/tech_specs/ETQuickRef.html

I was mistaken on the helmet rule.
good times jon too bad i did not hit my goal of low 13...... need to retune the Safc
Reply 0
Subscribe