Notices
Southeast Region Includes AL, FL, GA, NC, SC, TN, KY.

TEMEVO/SFL

Thread Tools
 
Search this Thread
 
Old May 30, 2007 | 06:56 PM
  #34096  
TTP Engineering's Avatar
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
Originally Posted by diablo2184
well im gettin the stage 2 or stage 1.....dont have a lot of power so not lookin to buy some crazy *** clutch setup....i just really need the clutch disc cuz its starting to slip
I have a 2000mi ACT XTSS with newly resurfaced flywheel I would hook you up with for $395 shipped. If you wanted us to install it, I would do it for $425 + fluids cost. (for this combo only)

We install about 100 clutches a year in the Evo application alone.

Transfercase and Trans fluid is replaced in the process.

ACT XTSS is good to 550whp or so.

I also have new units in stock too. HDSS, XTSS and TTP spec ceramettalic version available.

Jeff, you have a 2003, non-ACD transfercase which is easier than the 2005-2006 ACD equipped vehicles which need the ACD system bled also.

Don't minimize the difficulty level of the clutch installation, especially on ACD and especially MR where the transmission is hard pressed to even come out of the car without dropping the subframe.

Let me know if you are interested in any of these options Diablo.
Old May 30, 2007 | 07:02 PM
  #34097  
Evoryder's Avatar
Evolved Member
iTrader: (55)
 
Joined: Apr 2004
Posts: 7,383
Likes: 10
From: ☼ Florida ☼
Originally Posted by TTP Engineering
I have a 2000mi ACT XTSS with newly resurfaced flywheel I would hook you up with for $395 shipped. If you wanted us to install it, I would do it for $425 + fluids cost. (for this combo only)

We install about 100 clutches a year in the Evo application alone.

Transfercase and Trans fluid is replaced in the process.

ACT XTSS is good to 550whp or so.

I also have new units in stock too. HDSS, XTSS and TTP spec ceramettalic version available.

Jeff, you have a 2003, non-ACD transfercase which is easier than the 2005-2006 ACD equipped vehicles which need the ACD system bled also.

Don't minimize the difficulty level of the clutch installation, especially on ACD and especially MR where the transmission is hard pressed to even come out of the car without dropping the subframe.

Let me know if you are interested in any of these options Diablo.
good point...i forgot about the ACD. I think that's a great offer for you Diablo...drive up to Orlando, get the clutch installed drive back same day and you only have a few days of break in left. Wait, clutch should already be broken in...
Old May 30, 2007 | 07:44 PM
  #34098  
I_<3_Evo_IXs's Avatar
Newbie
iTrader: (2)
 
Joined: Aug 2006
Posts: 24
Likes: 0
From: Houstonian
Hey all, just droppin in for a few seconds to see what's going on...

I hate my yoga class! My teacher is such a hippie. I have an essay for my midterm that I've been trying to write for an hour and a half. Do I get points for spelling my name right?? Cause that's all I've got so far! Not to mention a pounding headache that isn't helping.. I digress.

Hope everyone's Memorial Day was good (I know it was 2 days ago, get over it) I've got my uncle's house this weekend! Free pool, foosball, ping pong, and booze... But I will be all alone cos Kyle will be in Sebring. But either way you're invited.

ok Im out!

PS (For those who might care) I'm on my 12th day of my Power90 program and I've lost 2 lbs already. Yay!
Old May 30, 2007 | 07:53 PM
  #34099  
Evoryder's Avatar
Evolved Member
iTrader: (55)
 
Joined: Apr 2004
Posts: 7,383
Likes: 10
From: ☼ Florida ☼
Originally Posted by I_<3_Evo_IXs
Hey all, just droppin in for a few seconds to see what's going on...

I hate my yoga class! My teacher is such a hippie. I have an essay for my midterm that I've been trying to write for an hour and a half. Do I get points for spelling my name right?? Cause that's all I've got so far! Not to mention a pounding headache that isn't helping.. I digress.

Hope everyone's Memorial Day was good (I know it was 2 days ago, get over it) I've got my uncle's house this weekend! Free pool, foosball, ping pong, and booze... But I will be all alone cos Kyle will be in Sebring. But either way you're invited.

ok Im out!

PS (For those who might care) I'm on my 12th day of my Power90 program and I've lost 2 lbs already. Yay!
Party at Laura's Uncs.!!! lol

congrats on the weight loss 2
Old May 30, 2007 | 07:57 PM
  #34100  
A so me go's Avatar
Newbie
iTrader: (1)
 
Joined: Nov 2006
Posts: 31
Likes: 0
From: South Florida
Originally Posted by TTP Engineering
I have a 2000mi ACT XTSS with newly resurfaced flywheel I would hook you up with for $395 shipped. If you wanted us to install it, I would do it for $425 + fluids cost. (for this combo only)

We install about 100 clutches a year in the Evo application alone.

Transfercase and Trans fluid is replaced in the process.

ACT XTSS is good to 550whp or so.

I also have new units in stock too. HDSS, XTSS and TTP spec ceramettalic version available.

Jeff, you have a 2003, non-ACD transfercase which is easier than the 2005-2006 ACD equipped vehicles which need the ACD system bled also.

Don't minimize the difficulty level of the clutch installation, especially on ACD and especially MR where the transmission is hard pressed to even come out of the car without dropping the subframe.

Let me know if you are interested in any of these options Diablo.
Is changing the flywheel to a lighter one a good or bad idea ?
Old May 30, 2007 | 08:06 PM
  #34101  
TTP Engineering's Avatar
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
Originally Posted by A so me go
Is changing the flywheel to a lighter one a good or bad idea ?
The stock flywheel is already light as it is. We get stock now what we used to pay Road Race Engineering 10 years ago to have machined and back cut to remove weight. If I recall correctly, stock is about 13lbs.

If you are going with a light rotating assembly you might as well go with a tilton clutch that weighs in at 19lbs with flwheel and clutch. Stock is 32lbs for clutch and flywheel.

If the flywheel is too light, you run the risk of throwing P0300 misfire DTC codes.
Old May 30, 2007 | 08:26 PM
  #34102  
Evoryder's Avatar
Evolved Member
iTrader: (55)
 
Joined: Apr 2004
Posts: 7,383
Likes: 10
From: ☼ Florida ☼
Originally Posted by TTP Engineering
The stock flywheel is already light as it is. We get stock now what we used to pay Road Race Engineering 10 years ago to have machined and back cut to remove weight. If I recall correctly, stock is about 13lbs.

If you are going with a light rotating assembly you might as well go with a tilton clutch that weighs in at 19lbs with flwheel and clutch. Stock is 32lbs for clutch and flywheel.

If the flywheel is too light, you run the risk of throwing P0300 misfire DTC codes.
you gonna respond to PM's or what?
Old May 30, 2007 | 09:31 PM
  #34103  
z4k's Avatar
z4k
Newbie
iTrader: (1)
 
Joined: Mar 2007
Posts: 86
Likes: 0
From: Here and There
Anyone got a OEM Evo Radio for sale?
Old May 30, 2007 | 09:47 PM
  #34104  
MR06Evo's Avatar
Evolving Member
iTrader: (24)
 
Joined: Mar 2006
Posts: 278
Likes: 1
From: miami,fl
^I have one out of my 06....Dont really know how much its worth though....
Old May 30, 2007 | 11:24 PM
  #34105  
z4k's Avatar
z4k
Newbie
iTrader: (1)
 
Joined: Mar 2007
Posts: 86
Likes: 0
From: Here and There
Originally Posted by MR06Evo
^I have one out of my 06....Dont really know how much its worth though....
Someone is selling me one for $25 + shipping. Is that what you will take. - Shipping ofcourse. LMK
Old May 31, 2007 | 04:56 AM
  #34106  
Evo Girlie's Avatar
Evolved Member
iTrader: (55)
 
Joined: Aug 2005
Posts: 1,143
Likes: 0
From: Florida
Laura: congrats on the power 90 routine and the 2lbs loss =)...

Morning guys, so yest I went to the dentist and i'm still hurting today =( I was suppose to go back today but um I think i'll pass and re-schedule lol
Old May 31, 2007 | 05:25 AM
  #34107  
Slick-IX's Avatar
Evolving Member
iTrader: (4)
 
Joined: Apr 2007
Posts: 372
Likes: 1
From: Ft Lauderdale, FL
GM ppl

Originally Posted by Evo Girlie
Morning guys, so yest I went to the dentist and i'm still hurting today =( I was suppose to go back today but um I think i'll pass and re-schedule lol
dont be scared
Old May 31, 2007 | 05:28 AM
  #34108  
Evo Girlie's Avatar
Evolved Member
iTrader: (55)
 
Joined: Aug 2005
Posts: 1,143
Likes: 0
From: Florida
Originally Posted by Slick-IX
dont be scared
i'm not scared, i'm tough....f@k that after yest and me still feeling the pain today and knowning i got an appointment for later I don't know if I want so much torture just 24 hours later
Old May 31, 2007 | 05:49 AM
  #34109  
VenomEVO8's Avatar
Evolved Member
iTrader: (21)
 
Joined: Dec 2004
Posts: 502
Likes: 1
From: Da Burgh
Originally Posted by Evo Girlie
i'm not scared, i'm tough....f@k that after yest and me still feeling the pain today and knowning i got an appointment for later I don't know if I want so much torture just 24 hours later
WHAT was done to you? just a filling??? I need a implant and a dentist down here
Old May 31, 2007 | 07:05 AM
  #34110  
Evo Girlie's Avatar
Evolved Member
iTrader: (55)
 
Joined: Aug 2005
Posts: 1,143
Likes: 0
From: Florida
Originally Posted by VenomEVO8
WHAT was done to you? just a filling??? I need a implant and a dentist down here
they were removing 1 filling and putting a new one. Well the filling they removed was there since i was like 7 or close to that age. Come to find out I had a huge cavity under the filling and they had to drill for like 20 mins and pick at it to get it out . I still feel like if she was in there cleaning and i have 2 other cavities, hopefully they are not as bad as the one from yest or i will tk drugs b4 going



All times are GMT -7. The time now is 10:52 PM.