Notices
Southeast Region Includes AL, FL, GA, NC, SC, TN, KY.

Charlotte Area Evo Owners

Thread Tools
 
Search this Thread
 
Old Oct 27, 2009 | 08:14 PM
  #2236  
dsm25psi's Avatar
Evolved Member
iTrader: (44)
 
Joined: Jun 2007
Posts: 914
Likes: 0
From: Charlotte,NC
Originally Posted by paintballer419
What if the HKS cams were free haha?
your not going to like the idle on hks 280s
Reply
Old Oct 27, 2009 | 11:12 PM
  #2237  
paintballer419's Avatar
Newbie
iTrader: (3)
 
Joined: Feb 2009
Posts: 95
Likes: 0
From: Charlotte NC
I think I will give them a shot and see how I like them. From what I have read, they actually perform very well if tuned good. I will also be purchasing cam gears to try to optimize them. I figure if they're free, there is no use in not giving them a shot, and I am sure Kasey can tune them out
Reply
Old Oct 28, 2009 | 09:26 AM
  #2238  
Force-Fed Performance's Avatar
Former Sponsor
iTrader: (46)
 
Joined: Oct 2009
Posts: 1,381
Likes: 0
From: Raleigh, Fayetteville NC
https://www.evolutionm.net/forums/ev...hermostat.html

Heads up fellas
Reply
Old Oct 28, 2009 | 10:24 AM
  #2239  
dsm25psi's Avatar
Evolved Member
iTrader: (44)
 
Joined: Jun 2007
Posts: 914
Likes: 0
From: Charlotte,NC
Originally Posted by paintballer419
I think I will give them a shot and see how I like them. From what I have read, they actually perform very well if tuned good. I will also be purchasing cam gears to try to optimize them. I figure if they're free, there is no use in not giving them a shot, and I am sure Kasey can tune them out
those cams are made for big turbo, you going to lose your mid power and would have to rev really high to get the use out of them. If you got them for free just sell them and get other cams that will get you good mid and high power. think about it before you spend money on the install and tune them.
Reply
Old Oct 28, 2009 | 11:01 AM
  #2240  
Kasey@MAP's Avatar
Former Sponsor
iTrader: (15)
 
Joined: Jul 2009
Posts: 24
Likes: 0
From: MAP
Originally Posted by dsm25psi
those cams are made for big turbo, you going to lose your mid power and would have to rev really high to get the use out of them. If you got them for free just sell them and get other cams that will get you good mid and high power. think about it before you spend money on the install and tune them.
Tim, I do agree they are overkill, but i have tuned 4 or more cars with the HKS 280's and they are not as aggressive as everyone thinks they are. I use to have a set on a stock turbo and they made good power, and the car went 7.30 at 98.5 in the 8th on them.

Kasey
Reply
Old Oct 28, 2009 | 06:00 PM
  #2241  
paintballer419's Avatar
Newbie
iTrader: (3)
 
Joined: Feb 2009
Posts: 95
Likes: 0
From: Charlotte NC
Originally Posted by Kasey@MAP
Tim, I do agree they are overkill, but i have tuned 4 or more cars with the HKS 280's and they are not as aggressive as everyone thinks they are. I use to have a set on a stock turbo and they made good power, and the car went 7.30 at 98.5 in the 8th on them.

Kasey
This is what I hoping to hear. They only have a 10.8 mm and 10.2mm lift, which is the same as their 272. There was a user on there with the stock 8 turbo, bolt ons, cam gears, and a good tune that made over 400 whp. I am not looking to make that much right now, and as long as I don't lose to much low end, I think I will be happy. When I got my car, when it was stock besides a Greddy RS bov and Apexi intake, the car didn't spool fully until 4000 rpms(which is the fault of the BOV). I lived with that and 17 psi of max boost for almost 6 months...

Last edited by paintballer419; Oct 28, 2009 at 06:04 PM.
Reply
Old Nov 16, 2009 | 02:13 PM
  #2242  
dsm25psi's Avatar
Evolved Member
iTrader: (44)
 
Joined: Jun 2007
Posts: 914
Likes: 0
From: Charlotte,NC
damn, what happened to Charlotte area? . It was nice to see everyone a the shootout
Reply
Old Nov 17, 2009 | 06:46 AM
  #2243  
EAVWIDL's Avatar
Account Disabled
iTrader: (15)
 
Joined: May 2009
Posts: 100
Likes: 0
From: mt.holly, n.c.
Got there late on saturday, was still a good many evos still around but didn't see anyone from charlotte either. We didnt get my evo done in time.
Reply
Old Nov 17, 2009 | 05:28 PM
  #2244  
Kasey@MAP's Avatar
Former Sponsor
iTrader: (15)
 
Joined: Jul 2009
Posts: 24
Likes: 0
From: MAP
Guys, I should be back in town next week for sure, hopefully I will be there before next week if Jamie's car goes good on break in. If anyone needs a tune or update, let me know. Also we dyno a few cars one day if you guys are interested in coming up to hang out.
Reply
Old Nov 17, 2009 | 05:43 PM
  #2245  
dsm25psi's Avatar
Evolved Member
iTrader: (44)
 
Joined: Jun 2007
Posts: 914
Likes: 0
From: Charlotte,NC
post some pics of jamies beast
Reply
Old Nov 18, 2009 | 07:00 AM
  #2246  
Kasey@MAP's Avatar
Former Sponsor
iTrader: (15)
 
Joined: Jul 2009
Posts: 24
Likes: 0
From: MAP
We will have some pics in his build thread as soon as the car hits the dyno.
Reply
Old Nov 23, 2009 | 05:39 PM
  #2247  
dsm25psi's Avatar
Evolved Member
iTrader: (44)
 
Joined: Jun 2007
Posts: 914
Likes: 0
From: Charlotte,NC
so what do u guys think about having a lil meet on dec4th? it been a while since we got together.
Reply
Old Nov 23, 2009 | 10:14 PM
  #2248  
paintballer419's Avatar
Newbie
iTrader: (3)
 
Joined: Feb 2009
Posts: 95
Likes: 0
From: Charlotte NC
im down!
Reply
Old Nov 24, 2009 | 06:47 AM
  #2249  
EAVWIDL's Avatar
Account Disabled
iTrader: (15)
 
Joined: May 2009
Posts: 100
Likes: 0
From: mt.holly, n.c.
I'll be there if my car is back.
Reply
Old Nov 24, 2009 | 10:54 AM
  #2250  
Evoz's Avatar
Newbie
iTrader: (1)
 
Joined: Dec 2006
Posts: 68
Likes: 0
From: Charlotte, NC
Originally Posted by dsm25psi
so what do u guys think about having a lil meet on dec4th? it been a while since we got together.

Hmm naw, naw that won't work for me that date is conflicting with my other plans

Yeah count me in Steve and George we're talking about getting something going soon.

I say The Lodge or Tilted Kilt !!!

The Lodge has awsome food , and the Kilt has half naked ladies both would be good choice's.

Reply



All times are GMT -7. The time now is 11:55 PM.