My Evo9mr Under Build!!!
#1
Newbie
Thread Starter
Join Date: Jan 2011
Location: toronto
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
My Evo9mr Under Build!!!
Jan 20, 2011
PICs will be added slowly as we have the parts put in the car.
Recently bought a Evo9mr from M.Y.Racing and we are looking forward to have some fun with it on the track this coming season. Just wanna share a little experience with all of you while we have this MR under development. I am getting some parts ready and so far these are what we bought.
ENGINE:
2.2L Stroker Kit
8.5:1 CR
HKS cams IN272/EX278
HKS FIC kit
ATI crank pulley
Jenvey Intake Manifold
AEM fuel rail
1000cc Injector Dynamic Injectors
Honda Throttle Body 68mm (drive-by-wire for anti-lag)
Full-Race Exhaust Manifold
Garret GT3076 Turbo + Tail WG
APH spec Turbo-Back Exhaust
HKS Titanium Muffler 3"
Fuel Surge Tank
Automotive Fuel System
ELECTRONICS
COSWORTH PECTEL SQ6M
COSWORTH EDC Diff. Controller
OMEGA D2 Dash with GPS beacon
SUSPENSION & BRAKE
Tein Super Racing Damper with APH spec custom re-valve + spring rate
Whiteline RCA BJ
Whiteline tie rods
Whiteline Bushing Kit
Stock Caliper
DBA 5000 Front rotors, 4000 Rear rotors
PMU Pads
Goodridge SS lines
EXTERIOR
VOLTEX CyberEvo Full kit with CyberEvo Street Front bumper
JDM rear bumper
JDM rear Tail light
WHEELS & TIRES
Enkei RPF-1 SBC finish 18x10.5 +15mm
Yoko A048 265/35R18
Jan 24, 2011
Well, got nothing to do in the shop today and we put the IX on the scales:
Before (stock)
3256lbs
Now (still stock car with all body parts removed, all interior parts removed including evaporator and other AC lines, no seats)
3022lbs
PICs will be added slowly as we have the parts put in the car.
Recently bought a Evo9mr from M.Y.Racing and we are looking forward to have some fun with it on the track this coming season. Just wanna share a little experience with all of you while we have this MR under development. I am getting some parts ready and so far these are what we bought.
ENGINE:
2.2L Stroker Kit
8.5:1 CR
HKS cams IN272/EX278
HKS FIC kit
ATI crank pulley
Jenvey Intake Manifold
AEM fuel rail
1000cc Injector Dynamic Injectors
Honda Throttle Body 68mm (drive-by-wire for anti-lag)
Full-Race Exhaust Manifold
Garret GT3076 Turbo + Tail WG
APH spec Turbo-Back Exhaust
HKS Titanium Muffler 3"
Fuel Surge Tank
Automotive Fuel System
ELECTRONICS
COSWORTH PECTEL SQ6M
COSWORTH EDC Diff. Controller
OMEGA D2 Dash with GPS beacon
SUSPENSION & BRAKE
Tein Super Racing Damper with APH spec custom re-valve + spring rate
Whiteline RCA BJ
Whiteline tie rods
Whiteline Bushing Kit
Stock Caliper
DBA 5000 Front rotors, 4000 Rear rotors
PMU Pads
Goodridge SS lines
EXTERIOR
VOLTEX CyberEvo Full kit with CyberEvo Street Front bumper
JDM rear bumper
JDM rear Tail light
WHEELS & TIRES
Enkei RPF-1 SBC finish 18x10.5 +15mm
Yoko A048 265/35R18
Jan 24, 2011
Well, got nothing to do in the shop today and we put the IX on the scales:
Before (stock)
3256lbs
Now (still stock car with all body parts removed, all interior parts removed including evaporator and other AC lines, no seats)
3022lbs
Last edited by ed@aph; Jan 24, 2011 at 01:41 PM.
#3
Welcome to the forums and good luck with the build... look forward to seeing your progress.
Why did I have this funny feeling that once I read it's a NextMOD/APH car... that it was going to be white? lol
Why did I have this funny feeling that once I read it's a NextMOD/APH car... that it was going to be white? lol
#7
Newbie
Thread Starter
Join Date: Jan 2011
Location: toronto
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Newbie
Thread Starter
Join Date: Jan 2011
Location: toronto
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Coz we are only targeting 480~520awhp on this road/circuit race car. We had an experience with this turbo setup on a 2.2L S2000 and we feel more confident since we already know the behavior from a similar setup.
Thread
Thread Starter
Forum
Replies
Last Post
Jhurley_EvoVIII
Project Cars / Build Threads
11
Sep 11, 2015 07:22 AM