So, you were the one keeping them busy... I'm getting excited. Next weekend needs to get here already!

 

mark, you have a PM.

 

Wow, nothing but ECU flashes this time! Where's all the EMS guys? Tapped out from December?

 

LoL both of you can S_ck it

 

if any of you have ever called here... u all know that won't work either


updated deposit list:

Josh Dumatrait = $100
Brandon Hughes = $300
Raymond Warner = $275
Truong Le = $100
Mark Berry = $300
Zeus = $275
Ben Hasty = $300
Kevin Dubois = $300

 

Just a reminder to EVERYONE attending to be tuned... I believe the last time it was requested that we show up with the undertray removed so there is no delay in strapping the car down. I highly recommend that EVERYONE remove theirs before your allotted time (I've had mine off for a week now for that very reason). I know no one wants to waste their dyno time having it removed. Of course you don't want your buddies standing around tapping their foot thinking "jackass", because you were the only lazy one not to do so.

 

Zeus, great reminder! This will save about 10-15 minutes per car. Thanks, Zeus!

 

whats an "undertray", and how do i remove it? and who goes after me ?

 

...and that is 10-15 mins if all the fasteners come out like they are supposed to

 

 

Bwahahaha, that is awesome Cody and so true. Oh and all of those fasteners never come out like they should, I usually end up cutting a few out each time that have stripped.

 

when fixing quincys intercooler pipe at the tsunami drive, we couldn't get those damn things offf either. solution to the problem was to loosen them and then pull really hard until they all popped off.

 

...yet another example of why we should have them off BEFORE we get there...

 

i use a tackpuller i got from homedepot for <$6.00 to hold the retainer still while turning the screw part. then once enough of the screw is exposed flip it over and it is a mini pry bar. works great.

 

finger nails work too, but asain's genious has blown my mind yet again