STM: New DSM FF t3 manifold
Aug 9, 2010, 10:35 AM
#1
STM: New DSM FF t3 manifold
Not for an Evo but still pretty cool!
Let me start out by saying this is by far the sexiest thing I have ever seen happen to a 2g DSM. Not only is it jaw-dropping appearance wise, but it is *****-out performance!
With the insane success we have had with the forward-facing turbo's on Evo's, we decided it was past time to get this kit into production for the DSM crowd.
With this kit there is no room for sissies! You will have to cut, you will have to trim, you will lose your A/C and you cannot run a filter. So if you have some serious *****... this is the manifold for you! If not, you can go pout in the corner and watch the big boys race!
You can keep your power steering and stock alternator location. The trimming to the frame is minor and can be cleanly done and we offer a carbon fiber vent that is perfect for the front bumper.
-We are offering the STM FF Manifold alone for $950.
-The Manifold with Carbon Fiber bumper vent for $1050
-And you can also purchase the manifold (as pictured) with the Precision PW46 gate, Precision 6262 and bumper vent for $2250 (journal bearing) or $2650 (ball bearing)
Ladies and gentlemen, please get a towel to sop up your drool.
Right now we have a customer (Nick D.) car here getting this kit installed and we plan on having it at the DSM Shootout. As of now, we are not offering it as a full bolt on kit. You will need to fabricate an exhaust, run a half-size radiator and so on. If you would like to make an appointment, we can get it all done for you!
These can be purchased right through our website:
STM: STM FORWARD FACING TURBO MANIFOLD | 95-99 DSM
Stay tuned for more pictures.
-STM
Let me start out by saying this is by far the sexiest thing I have ever seen happen to a 2g DSM. Not only is it jaw-dropping appearance wise, but it is *****-out performance!
With the insane success we have had with the forward-facing turbo's on Evo's, we decided it was past time to get this kit into production for the DSM crowd.
With this kit there is no room for sissies! You will have to cut, you will have to trim, you will lose your A/C and you cannot run a filter. So if you have some serious *****... this is the manifold for you! If not, you can go pout in the corner and watch the big boys race!
You can keep your power steering and stock alternator location. The trimming to the frame is minor and can be cleanly done and we offer a carbon fiber vent that is perfect for the front bumper.
-We are offering the STM FF Manifold alone for $950.
-The Manifold with Carbon Fiber bumper vent for $1050
-And you can also purchase the manifold (as pictured) with the Precision PW46 gate, Precision 6262 and bumper vent for $2250 (journal bearing) or $2650 (ball bearing)
Ladies and gentlemen, please get a towel to sop up your drool.
Right now we have a customer (Nick D.) car here getting this kit installed and we plan on having it at the DSM Shootout. As of now, we are not offering it as a full bolt on kit. You will need to fabricate an exhaust, run a half-size radiator and so on. If you would like to make an appointment, we can get it all done for you!
These can be purchased right through our website:
STM: STM FORWARD FACING TURBO MANIFOLD | 95-99 DSM
Stay tuned for more pictures.
-STM
Trending Topics
Aug 23, 2010, 03:20 PM
#9
As soon as the few small things are taken care of like Fuel issues (ran out of fuel very early) I will be flying down to NC to tune the car. So if anyone wants to be tuned while I am down there feel free to let me know.
Thanks
-Em
Thanks
-Em
Aug 27, 2010, 01:56 PM
#14
Nothing at all is set up at this point. I know I have to go down to finish Nicks car once he gets a few small things ironed out. As soon as that happens I will let you know so we can get together. At this point I am not even sure If I will do it there or somewhere else. All depends on whats going on down there when he is ready.
-Em