Cbrd- new RB-X Turbo Kits!! Complete
Thread Starter
Account Disabled
iTrader: (60)
Joined: Dec 2004
Posts: 7,363
Likes: 8
From: york, pa 17402
Cbrd- new RB-X Turbo Kits!! Complete
This is our new for 2015 CBRD Rb-X turbocharger setup--
Features are as follows:
CBRD 1.25" Tubular Vband Manifold (back purged, tig welded Stainless)
CBRD 3" Downpipe with Vband inlet- two O2 sensor bungs- bolts up to stock location mid pipe (production versions include flex bellow)
CBRD Inlet pipe and Intercooler outlet pipe conversion- to fit oem or aftermarket parts (you specify when ordering)
Can use OEM EVO X water lines- but we can also supply AN lines- at no extra cost-
Modified Mitsu oil return tube
BW EFR 7163 with IWG Vband hotside with high pressure actuator and built in bov (optional block off plate, but you can run bov in both locations if desired)
Optional: Boost solenoid with extension harness on compressor cover!!
hee he
information is going to be posted here shortly with the dyno numbers with Stock catback, stock airbox, stock ic pipes etc- and also with CBRD fmic, ic pipes, catback etc-
Stay Tuned- Pre-orders have already been placed and are being taken now!!
http://www.cbrdspeedfactory.com/new-turbo-solutions-1/
Features are as follows:
CBRD 1.25" Tubular Vband Manifold (back purged, tig welded Stainless)
CBRD 3" Downpipe with Vband inlet- two O2 sensor bungs- bolts up to stock location mid pipe (production versions include flex bellow)
CBRD Inlet pipe and Intercooler outlet pipe conversion- to fit oem or aftermarket parts (you specify when ordering)
Can use OEM EVO X water lines- but we can also supply AN lines- at no extra cost-
Modified Mitsu oil return tube
BW EFR 7163 with IWG Vband hotside with high pressure actuator and built in bov (optional block off plate, but you can run bov in both locations if desired)
Optional: Boost solenoid with extension harness on compressor cover!!
hee he
information is going to be posted here shortly with the dyno numbers with Stock catback, stock airbox, stock ic pipes etc- and also with CBRD fmic, ic pipes, catback etc-
Stay Tuned- Pre-orders have already been placed and are being taken now!!
http://www.cbrdspeedfactory.com/new-turbo-solutions-1/
Last edited by CBRD; Mar 12, 2015 at 03:21 PM.
Thread Starter
Account Disabled
iTrader: (60)
Joined: Dec 2004
Posts: 7,363
Likes: 8
From: york, pa 17402
Here you go!
SAME CAR in both-
Solid is RB-X kit with STOCK airbox, STOCK IC PIPES-
Dashed- is last fall, SAME car- with 3" intake, IC pipes, BBX with manifold and AMS downpipe
no changes were made to timing OR Mivec- only fueling/maf scaling due to going back from 3" intake to stock airbox-
This is versus another EVO X from today- with bbx full bb/manifold/amsdownpipe/GSC S1 cams-
similar boost but not exact
Gives you some idea!!
cb
SAME CAR in both-
Solid is RB-X kit with STOCK airbox, STOCK IC PIPES-
Dashed- is last fall, SAME car- with 3" intake, IC pipes, BBX with manifold and AMS downpipe
no changes were made to timing OR Mivec- only fueling/maf scaling due to going back from 3" intake to stock airbox-
This is versus another EVO X from today- with bbx full bb/manifold/amsdownpipe/GSC S1 cams-
similar boost but not exact
Gives you some idea!!
cb
Trending Topics
Thread Starter
Account Disabled
iTrader: (60)
Joined: Dec 2004
Posts: 7,363
Likes: 8
From: york, pa 17402
Thread
Thread Starter
Forum
Replies
Last Post
Gary@MellonRacing
EvoX 'For Sale' External Engine / Power
50
Jun 29, 2011 09:20 AM
StevenStarke
Evo 'For Sale' External Engine / Power
4
Apr 8, 2008 03:06 PM
Gruppe-S
Evo 'For Sale' External Engine / Power
8
Mar 21, 2005 10:43 PM