Notices
Vendor Service / Parts / Tuning Review Post your service, part & tuning reviews here. Please note all new threads are moderated.

need input on dyno numbers

Thread Tools
 
Search this Thread
 
Old Aug 15, 2007 | 10:40 AM
  #1  
stockredevo's Avatar
Thread Starter
Newbie
iTrader: (3)
 
Joined: Jan 2007
Posts: 37
Likes: 0
From: St.louis
need input on dyno numbers

I went to ams and got a reflash. im thinking that these numbers are low I dynoed 375/300. ive got 880s gt35r buddy club cams 272 little bit bigger than stock front mount all the bolt ons. this was on 93oct at 21psi tapering down to 19psi. just wondering what you guys thought.



thanks steve
Reply
Old Aug 15, 2007 | 10:43 AM
  #2  
Magnumpsi's Avatar
Evolved Member
20 Year Member
iTrader: (2)
 
Joined: Aug 2005
Posts: 1,045
Likes: 0
From: Who Knows
Dyno sheet.

Mitch
Reply
Old Aug 15, 2007 | 10:45 AM
  #3  
pbevo12's Avatar
Evolving Member
iTrader: (17)
 
Joined: May 2007
Posts: 145
Likes: 0
From: south fl
seems low to me also ,but maybe its the hole reflash part but also you could need more supporting mods ,,,2 friends of mine both make over 500 with a 35r ..they do have standalones 1000cc injectors big fmic ,i think they are both at like 450 pump!!..
Reply
Old Aug 15, 2007 | 01:26 PM
  #4  
mrdevo's Avatar
Evolved Member
iTrader: (4)
 
Joined: Apr 2004
Posts: 722
Likes: 0
From: Ct
It does seem low and that turbo shouldn't taper like that until it has a lot of boost thrown at it. I would expect at least 400whp and more if you were going to shoot for 23-25psi on pump.
Reply
Old Aug 15, 2007 | 01:27 PM
  #5  
mrdevo's Avatar
Evolved Member
iTrader: (4)
 
Joined: Apr 2004
Posts: 722
Likes: 0
From: Ct
Also, the weather probably didn't help you out at all either, so picture better numbers when it starts to cool down.
Reply
Old Aug 15, 2007 | 01:53 PM
  #6  
stockredevo's Avatar
Thread Starter
Newbie
iTrader: (3)
 
Joined: Jan 2007
Posts: 37
Likes: 0
From: St.louis
I was told by ams that even with there kit and the cams that they would install with there front mount and there piping I would be at 400whp. I was wanting 420ish at the wheels I guess I was expecting to much. it was hot as hell. I was wanting to go up to 23psi and hold but they told me not on pump on gas but I see guys on here all day long pushing 23psi on pump gas I have head studs

Last edited by stockredevo; Aug 15, 2007 at 02:01 PM.
Reply
Old Aug 15, 2007 | 02:00 PM
  #7  
Cali2MDevo8's Avatar
Registered User
iTrader: (22)
 
Joined: Sep 2005
Posts: 2,324
Likes: 0
From: MD/PA line
Appears to be low with that big turbo. You need to list all your mods though.

Jason
Reply
Old Aug 15, 2007 | 02:10 PM
  #8  
stockredevo's Avatar
Thread Starter
Newbie
iTrader: (3)
 
Joined: Jan 2007
Posts: 37
Likes: 0
From: St.louis
head studs
ams 880s
gt35r turbo kit
intercooler piping
buddy club cams 272
ported exhaust side on my head
little bit bigger than stock front mount
stage 2 clutch
Reply
Old Aug 15, 2007 | 02:14 PM
  #9  
Boltz.'s Avatar
Evolved Member
FCOTM Winner
iTrader: (42)
 
Joined: Aug 2005
Posts: 2,502
Likes: 0
From: St. Charles, IL
What size is the 35R? .63 exhaust?
Did you do a boost leak test before you had it tuned? Did you change the plugs and oil before getting it tuned?
Reply
Old Aug 15, 2007 | 02:53 PM
  #10  
nyaegermeister's Avatar
Evolving Member
iTrader: (6)
 
Joined: Dec 2005
Posts: 130
Likes: 0
From: New Albany, IN
The "little bigger than stock" fmic is probably robbing you of power, especially the way the heat has been. I'm sure it was well over 100 degrees in the dyno room. You should probably have an intercooler more like what ETS and AMS sells.
Reply
Old Aug 15, 2007 | 05:23 PM
  #11  
stockredevo's Avatar
Thread Starter
Newbie
iTrader: (3)
 
Joined: Jan 2007
Posts: 37
Likes: 0
From: St.louis
it is a .63 exhaust. ams did a boost leak check they didnt find any. I changed the oil and plugs.
Reply
Old Aug 15, 2007 | 05:38 PM
  #12  
mrdevo's Avatar
Evolved Member
iTrader: (4)
 
Joined: Apr 2004
Posts: 722
Likes: 0
From: Ct
With 23-24psi and cooler weather I could see 425whp and maybe more
Reply
Old Aug 15, 2007 | 10:01 PM
  #13  
stockredevo's Avatar
Thread Starter
Newbie
iTrader: (3)
 
Joined: Jan 2007
Posts: 37
Likes: 0
From: St.louis
who will let me push that kind of psi on pump gas.
Reply
Old Aug 15, 2007 | 10:08 PM
  #14  
staatz's Avatar
Evolved Member
iTrader: (12)
 
Joined: Sep 2005
Posts: 1,591
Likes: 1
From: Danbury, CT
Every other tuner out there A kid around here was assured 400whp and he dumped LOADS of money and made 369whp.. Pwned by AMS..lol
Reply
Old Aug 15, 2007 | 10:46 PM
  #15  
stockredevo's Avatar
Thread Starter
Newbie
iTrader: (3)
 
Joined: Jan 2007
Posts: 37
Likes: 0
From: St.louis
I dont know much about afr ratio but under full throttle im at 10.8 aint that running a little rich.
Reply



All times are GMT -7. The time now is 02:32 PM.