SpoolinUp rewire project
Thread Starter
Evolved Member
iTrader: (27)
Joined: Nov 2003
Posts: 2,123
Likes: 1
From: Oak Creek, WI
SpoolinUp rewire project
Rewind back to early May. I had the car on the dyno and anything in the high RPM band it would misfire something bad.
This was at 25psi on 6262 and E-85
So it was turned back to 23psi with only a small hiccup, that I could live with until I found the problem. In the last few weeks the car was completely undrivable.
It ends up being the wiring harness on the COP setup. This is a Hypertune COP with the MW Pro-12 S3 box.
Old wiring
I called numerous people to try and have a new harness built for me (BR, Switzer, Sparktech) and no one would even attempt to do it. Until I got a hold of Matt at SpoolinUp. Very nice individual to deal with and great communication skills. So the project has begun
UPDATE: One or more of the solder joints onto the coil were loose and not making a connection.
New wiring so far
Since Hypertune soldered on the wire directly to the coils the connectors on the coil pack were junk, not even worth the time to try and fix so I will be sending him new coils today.
I can't say enough of him, and Im more than positive that this will give me a much smoother graph than the one above.
Ill keep adding on with the final outcome.
This was at 25psi on 6262 and E-85
So it was turned back to 23psi with only a small hiccup, that I could live with until I found the problem. In the last few weeks the car was completely undrivable.
It ends up being the wiring harness on the COP setup. This is a Hypertune COP with the MW Pro-12 S3 box.
Old wiring
I called numerous people to try and have a new harness built for me (BR, Switzer, Sparktech) and no one would even attempt to do it. Until I got a hold of Matt at SpoolinUp. Very nice individual to deal with and great communication skills. So the project has begun
UPDATE: One or more of the solder joints onto the coil were loose and not making a connection.
New wiring so far
Since Hypertune soldered on the wire directly to the coils the connectors on the coil pack were junk, not even worth the time to try and fix so I will be sending him new coils today.
I can't say enough of him, and Im more than positive that this will give me a much smoother graph than the one above.
Ill keep adding on with the final outcome.
Last edited by dryad001; Jul 6, 2010 at 11:34 AM.
She's leaving today with my other orders!
. Im in the middle of putting new valves in cause of a cracked water jacket, but by next weekend should have my car up and running
Trending Topics
Thread Starter
Evolved Member
iTrader: (27)
Joined: Nov 2003
Posts: 2,123
Likes: 1
From: Oak Creek, WI
What did ya have in mind?
Thread
Thread Starter
Forum
Replies
Last Post
jonmorera
Evo How Tos / Installations
455
Feb 15, 2019 05:28 AM
pupo
Vendor Service / Parts / Tuning Review
26
Jun 15, 2015 10:51 AM
hatesposers
For Sale/WTB - Engine / Drivetrain / Power
4
Oct 30, 2013 02:12 PM
dryad001
For Sale/WTB - Engine / Drivetrain / Power
20
Jun 22, 2010 02:25 PM
