Help with XEDE Installation in Buffalo
Help with XEDE Installation in Buffalo
Evolved Member
iTrader: (20)
Joined: Mar 2003
Posts: 4,941
Likes: 0
From: Danville/Blackhawk, California
Originally Posted by newmr
I just got an XEDE for my new Evo and I am having trouble installing it. Any XEDE experts in the Buffalo, NY area willing to help, please PM me. Just want to get everything running. I am really pretty stuck and I am having difficulty with the wiring. Anyone who can help meout can take the MR for a spin (once it is up and running!) and have my eternal thanks
.
Sam
.Sam
Did you download the instructions from our website? Should be pretty staightforward. But then again, I wrote them
Shiv
Did you finally get it installed?
what part are you having difficulty with?
Installing the XEDE itself was not too hard, but getting to the boost solenoid and removing the brass restrictor pill sucked a**!! Basically, you can just take the two bolts out to loosen the air intake box and pull it up to get at the boost solenoid rather than have to remove the turbo hoses. Then just have patience and strong fingers and it will work.
Good luck and if you have more problems, call Vishnu and have one of their staff help talk you through it.
Tony
what part are you having difficulty with?
Installing the XEDE itself was not too hard, but getting to the boost solenoid and removing the brass restrictor pill sucked a**!! Basically, you can just take the two bolts out to loosen the air intake box and pull it up to get at the boost solenoid rather than have to remove the turbo hoses. Then just have patience and strong fingers and it will work.
Good luck and if you have more problems, call Vishnu and have one of their staff help talk you through it.
Tony