We have a beta version of V3 that has worked quite well on the cars we have tested it on. We can actually post the firmware file on line with instructions on how to update your own xede out of the comfort of your own home. From start to finish, it should take 5-6 minutes. I'm guessing that more than a few would be interested in running it.

However, in order to update your firmware, you will need to put your XEDE into "boot mode". This involves bringing 12v power to one of the pins on the XEDE connector (pin 9 on the black connector.) For this, you will need a special wire to push into the socket. You will need to get this from us. This will be sent out via mail and it will get to you in 2-4 days. By then, I will have the step-by-step guide up here

So, if you want this wire (free of charge of course), please send a PM to Calvin@Vishnu and we'll send it out to you via US mail.

Cheers,
shiv

 

V3 is so last year. I want V4.

 

^

 

if you promise not to lose my xede, can i send mine in for an upgrade ?

 

Launch control is alot of fun. Now I actually have chance of 0-60 in 4 seconds

Can't wait for the SoCAL dyno day

 

will you guys be doing this at the Dyno4mance days? I plan on being there, and would prefer a professional updater...haha.

 

Launch control is fun for the first few times.

 

first few, and then what?

 

Nice.

Last I heard the launch control only worked for a single pass, the the xede needed to be power cycled before it could be used again. Is this the case?

d

 

I'm guessing he's talking about some part of the drivetrain calling it quits...

 

thats what i was afeared of.

 

You gotta pay to play....

 

does any one have any video or audio of the launch control in action and how does it work?

 

Pm'd! Looking forward to the firmware!

 

bump. for the question about Dyno4mance. I'll be there and would love to have mine done then. I don't have a laptop at this time. So, it would be great if you could just do it then. does it tell the new features of the V3 on your site shiv. or could you give us the run down on what's new. Thanks alot.


-Chad-