Need A Inake Advice Needed
Thread Starter
Evolving Member
iTrader: (8)
Joined: Dec 2003
Posts: 308
Likes: 0
From: Lafayette, LA
Need A Air Filter Kit Advice Needed
I added a hard IC Pipe Kit, and need a intake kit. I know there in no benefit and that Vishnu reccomends retaing the stock air box, but the upper IC pipe rubs on the air box, and I thinks it causing my idle problems with knocking the MAF sensor around. The upper IC pipe vibrating on the air box. I'm looking for some advice on some worthy replacements as far as air filter kit replacements. Also will I need to send Vishnu my ECU for reflasing? Its currently flashed for a stage 1+. Adding the upper IC pipes and intake kit. I have a stage 1+ and its running rich, and stubling at idle.
Thanks in advance.
Larry
Thanks in advance.
Larry
Originally Posted by Volunteer
I added a hard IC Pipe Kit, and need a intake kit. I know there in no benefit and that Vishnu reccomends retaing the stock air box, but the upper IC pipe rubs on the air box, and I thinks it causing my idle problems with knocking the MAF sensor around. The upper IC pipe vibrating on the air box. I'm looking for some advice on some worthy replacements as far as air filter kit replacements. Also will I need to send Vishnu my ECU for reflasing? Its currently flashed for a stage 1+. Adding the upper IC pipes and intake kit. I have a stage 1+ and its running rich, and stubling at idle.
Thanks in advance.
Larry
Thanks in advance.
Larry
Upper IC pipes seem to display lots of additional problems and do not yield very much, if any, gains...
IMO a much better solution to combat stock coupler expansion would be Samco IC silicone connector kit and a larger lower IC pipe from someone like AMS....this will yield the same results but carry No additional fitment issues
My 2c
Thread Starter
Evolving Member
iTrader: (8)
Joined: Dec 2003
Posts: 308
Likes: 0
From: Lafayette, LA
Originally Posted by gsujeff55
What upper IC pipe kit do you have?
See above.



