Conditional software for upcoming Dyno Days
Thread Starter
Evolved Member
iTrader: (20)
Joined: Mar 2003
Posts: 4,941
Likes: 0
From: Danville/Blackhawk, California
Conditional software for upcoming Dyno Days
Hi guys,
Just an update. New conditional logic are now working just fine. I've been updating customers, in house, for the last few days now with no issues. I'll be doing the same during all the dyno days (St. Louis, NJ, GA, Socal, etc,.) upon request. I'll be setting up overboost protection, lean-run protection (for SMART equipped cars) and Smart fuel activation (fuel threshold table no longer needed). In addition to the conditional user-definable features, we've incorporated idle/MAF smoothening (for cam'd cars), improved start-up and other nifty stuff that should be largely transparent to the end user.
-shiv
Just an update. New conditional logic are now working just fine. I've been updating customers, in house, for the last few days now with no issues. I'll be doing the same during all the dyno days (St. Louis, NJ, GA, Socal, etc,.) upon request. I'll be setting up overboost protection, lean-run protection (for SMART equipped cars) and Smart fuel activation (fuel threshold table no longer needed). In addition to the conditional user-definable features, we've incorporated idle/MAF smoothening (for cam'd cars), improved start-up and other nifty stuff that should be largely transparent to the end user.
-shiv
Originally Posted by shiv@vishnu
Hi guys,
Just an update. New conditional logic are now working just fine. I've been updating customers, in house, for the last few days now with no issues. I'll be doing the same during all the dyno days (St. Louis, NJ, GA, Socal, etc,.) upon request. I'll be setting up overboost protection, lean-run protection (for SMART equipped cars) and Smart fuel activation (fuel threshold table no longer needed). In addition to the conditional user-definable features, we've incorporated idle/MAF smoothening (for cam'd cars), improved start-up and other nifty stuff that should be largely transparent to the end user.
-shiv
Just an update. New conditional logic are now working just fine. I've been updating customers, in house, for the last few days now with no issues. I'll be doing the same during all the dyno days (St. Louis, NJ, GA, Socal, etc,.) upon request. I'll be setting up overboost protection, lean-run protection (for SMART equipped cars) and Smart fuel activation (fuel threshold table no longer needed). In addition to the conditional user-definable features, we've incorporated idle/MAF smoothening (for cam'd cars), improved start-up and other nifty stuff that should be largely transparent to the end user.
-shiv
-M
Trending Topics
This is a firmware update and then modification of existing maps, right? For existing SMART users would you modify the maps for us? The reason I ask is that I won't be able to catch up with you on the trip to Dyno4mance in May, but would like to upgrade for the "nifty stuff".
Shiv, you said the lean protect feature would work with any WB O2, now its for SMART equiped cars only.
I have a Zeitronic WB and a Knock buffer (hooked up to the Zetronix). I don't want SMART Furl or SMART timing capablities, just the Lean Protection Feature.
So can/will it work??
Also, I know you probably hate this question, but when is the IX harness and update (if needed) gonna be available?? I really would like to hook up my Xede, so I can install my TBE and start having fun.
I have a Zeitronic WB and a Knock buffer (hooked up to the Zetronix). I don't want SMART Furl or SMART timing capablities, just the Lean Protection Feature.
So can/will it work??
Also, I know you probably hate this question, but when is the IX harness and update (if needed) gonna be available?? I really would like to hook up my Xede, so I can install my TBE and start having fun.
Evolving Member
Joined: Sep 2002
Posts: 383
Likes: 0
From: Florida
Originally Posted by Evo_Kid
Shiv, you said the lean protect feature would work with any WB O2, now its for SMART equiped cars only.
I have a Zeitronic WB and a Knock buffer (hooked up to the Zetronix). I don't want SMART Furl or SMART timing capablities, just the Lean Protection Feature.
So can/will it work??
Also, I know you probably hate this question, but when is the IX harness and update (if needed) gonna be available?? I really would like to hook up my Xede, so I can install my TBE and start having fun.
I have a Zeitronic WB and a Knock buffer (hooked up to the Zetronix). I don't want SMART Furl or SMART timing capablities, just the Lean Protection Feature.
So can/will it work??
Also, I know you probably hate this question, but when is the IX harness and update (if needed) gonna be available?? I really would like to hook up my Xede, so I can install my TBE and start having fun.
It will/should work but you would have to reconfigure any table that uses the wideband as an input. That or if you're wideband is programable - make it act exactly like the lc-1.