Knock Light Implementation
Ok here is a writeup on how to implement a knock light via the MIL indicator in the cluster.
Testing this configuration is a matter not covered in the document. Specifically it isn't logical to create a real knock condition to simply see if the light will come on.
P.S. Don't shoot me for the way I had to upload these files. The limit on file size drove me to simply break the document into the individual pages.
Edit: Added a page and replaced page 4 to document a electrical test.
Testing this configuration is a matter not covered in the document. Specifically it isn't logical to create a real knock condition to simply see if the light will come on.
P.S. Don't shoot me for the way I had to upload these files. The limit on file size drove me to simply break the document into the individual pages.
Edit: Added a page and replaced page 4 to document a electrical test.
Last edited by freedom; Aug 13, 2006 at 02:55 PM.
Also here is a reference document from ChipTorque on how to use the water spray output of the Xede.
Also Road Race documents the Evo's ECU pinout in this web page,
http://www.roadraceengineering.com/e...-ecuwiring.htm
Also Road Race documents the Evo's ECU pinout in this web page,
http://www.roadraceengineering.com/e...-ecuwiring.htm
