Who can tune the XEDE??
Who can tune the XEDE??
I have Buschur Intake, MAF pipe, I/C pipe, and 3" turbo back. I also have the XEDE sitting in a box. I will be getting 264's very soon to add to the car.
My question is where can I get my car dyno tuned in TEXAS?? I can not use a downloaded map. I need a custom map because of my mods.
Shiv will you please help me out. I doubt you will be coming back here for a few months or so, and I would like to get it tuned in Texas somewhere. Cali is too far away.
Thanks
My question is where can I get my car dyno tuned in TEXAS?? I can not use a downloaded map. I need a custom map because of my mods.
Shiv will you please help me out. I doubt you will be coming back here for a few months or so, and I would like to get it tuned in Texas somewhere. Cali is too far away.
Thanks
Evolved Member
iTrader: (20)
Joined: Mar 2003
Posts: 4,941
Likes: 0
From: Danville/Blackhawk, California
Anyone can tune the XEDE. The interface is quite intuitive. Despite it's flexability, it's conceptually no more difficult to tweak than an S-AFC II. Just make sure you go to a reputable tuner since that will be the biggest contributor to success, not necessarily their experience with the XEDE software.
shiv
shiv
Do you know anyone or reccomend anyone in Txas. I would prefer to use someone that you know, so if they need any help they can just give you a call. If you dont want to name names you can PM me who you recommend.
Thanks again
Thanks again
Evolved Member
iTrader: (20)
Joined: Mar 2003
Posts: 4,941
Likes: 0
From: Danville/Blackhawk, California
I honestly don't know many tuners in TX. You're best bet is asking around among the locals. I have talked to Jason at FIS and he seems fully capable of tuning it if need be.
shiv
shiv
FIS - Forced Induction Systems
Contact Info:
Phone: 972.346.2401
Fax: 972.347.3270
E-Mail: info@fi-systems.com
Hours of Operation
Monday - Friday 9am - 6pm
Location
Forced Induction Systems
10040 Champion Ln
McKinney, TX 75071
Directions
From Central Expressway:
75 N to Virginia Parkway
West on Virginia Parkway about 5.5 miles
Cross Custer (FM 2478) and turn right in to AeroCountry Airport
Champion Lane is the 3rd street on the right. Look for the sign.
From Dallas Tollway:
Tollway north to 121
East on 121 to Custer
North on Custer to Virginia Parkway
Turn left on to Virginia Parkway and right in to AeroCountry Airport.
Champion Lane is the 3rd street on the right. Look for the sign.
I had a Dyno Day there and Jason is a really good guy.
If you don't want to drive to Dallas you might want to try Mohammad from MZM in Austin.
MZM - More Zoom Motorsports
Contact Info:
Also, we can be reached by phone Monday-Friday 8am-6pm CST and Saturday 9am-3pm CST at:
phone - (512) 837-6200
fax - (512) 989-6822
MZM International Inc.
1904 West Howard Lane
Austin, TX. 78728
Contact Info:
Phone: 972.346.2401
Fax: 972.347.3270
E-Mail: info@fi-systems.com
Hours of Operation
Monday - Friday 9am - 6pm
Location
Forced Induction Systems
10040 Champion Ln
McKinney, TX 75071
Directions
From Central Expressway:
75 N to Virginia Parkway
West on Virginia Parkway about 5.5 miles
Cross Custer (FM 2478) and turn right in to AeroCountry Airport
Champion Lane is the 3rd street on the right. Look for the sign.
From Dallas Tollway:
Tollway north to 121
East on 121 to Custer
North on Custer to Virginia Parkway
Turn left on to Virginia Parkway and right in to AeroCountry Airport.
Champion Lane is the 3rd street on the right. Look for the sign.
I had a Dyno Day there and Jason is a really good guy.
If you don't want to drive to Dallas you might want to try Mohammad from MZM in Austin.
MZM - More Zoom Motorsports
Contact Info:
Also, we can be reached by phone Monday-Friday 8am-6pm CST and Saturday 9am-3pm CST at:
phone - (512) 837-6200
fax - (512) 989-6822
MZM International Inc.
1904 West Howard Lane
Austin, TX. 78728



