I have been told to install the nozzle on the Upper IC pipe? I would think it would be better to install it on the cuppling on the Upper IC pipe to give it a straight shot. Thoughts/Comments

 

We instructed you to install it in the hard pipe as it is our kit. If you do not take the manufacturer's advice, who's advice can you take?

This is meth injection, not nitrous. Mount it where we suggested.... is our suggestion.

 

So, why is it better to attached it to the IC pipe? I know what u suggest but I would like to know the rationale.

 

Dude, offense but these guys just busted you hard.. I would maybe have asked them why you should mount it there first.. Then if you didnt like the answer you could ask others.. Looks like you are "getting it straight from the horses mouth", (so to speak), last. Never a good idea.

remember. Always trust your own descision making skills first.. If you rely on others for the answers to your questions in life. You will only get what the others have already gotten.

 

I meant NO offense BTW

 

Let me answer your question with this question. How are you going to hold it in the rubber pipe if you mount it there. The nozzle is threaded for a reason. It is to be tapped into a metal pipe such as the hard upper ic pipe.

If you are not going to listen to the manufacturer, who are you going to listen to?

If you insist on trying to tap it in a pipe not suggested by the manufacturer, then you are on your own. This is your written disclosure.

 

I was trying to get other peoples input on this issue. I have a few friends that have the nozzle on the cuppling and they simply attached a washer and a nut to the underside of the nozzle to hold it in place.

In all seriousness, I appreciate your response ttp-engineering!

P.S. Remember, don't pet it if you just met it.

 

I actually did speak with him before posting on the forum. I was directing it toward other people on the board to gathering their input.

 

My input, is listen to TTP!