Is it true that using water/meth can cause internal parts to wear out faster and cause failure?

any experiences?
if yes?
on what kit and waht percentage?

 

I personally wouldn't run water or meth in a Daily Driver... but some may be crazy enough to do so.

 

why not? I'd say most of us that run alky are on our DD's

 

No

 

so should i just live meth in the tank for a Daily Driver and use it on a progressive kit like the AMS one

 

going fast cause $...parts will wear out and break due to increased stresses

-run a constant pressure system so that you get optimal atomization@all time
-run a solenoid valved system so that injection will start/stop when it is supposed to

 

do you know any package from any company that has those properties you mentioned?

 

for ~$500, you can run the basic, very cost effective boost triggered aquamist system (150W aquamist/shurflo 125psig by-pass pump + aquamist dds3 failsafe + solenoid valve) - simple yet surpassing in performance to any progressive systems currently available

https://www.evolutionm.net/forums/sh...36&postcount=4

you can upgrade the the above system to the HFS-5 later if you wish to the ultimate in alky injection by the addition of the fuel injection amplifier and the amazing High Speed Valve.

https://www.evolutionm.net/forums/sh...53&postcount=1

 

great
thanks man