Notices
Water / Methanol Injection / Nitrous Oxide

Find me a meth kit!

Thread Tools
 
Search this Thread
 
Old Sep 1, 2009 | 09:52 AM
  #1  
coolguyuno1's Avatar
Thread Starter
Evolving Member
iTrader: (17)
 
Joined: Feb 2008
Posts: 305
Likes: 0
From: Kansas
Find me a meth kit!

Hi! I'm looking for an affordable and performance savy meth kit running 50/50 to hit or break 400 hp!

Mod list Evo IX:
Walboro 255
Solid front and side motor mounts
AMS Intercooler
Injen piping including intake
Greddy Comp T-IC
RSR catless downpipe
Meagan o2
Forge MBC set at 22 PSI
ARP Headstuds
Forge RS BOV
Stock turbo/injectors


Thanks in advance,

-Coolguyuno1

Last edited by coolguyuno1; Oct 17, 2010 at 10:57 AM.
Reply
Old Sep 1, 2009 | 11:52 AM
  #2  
Richard L's Avatar
Former Sponsor
iTrader: (5)
 
Joined: Aug 2005
Posts: 2,236
Likes: 0
From: England
The aquamist HFS-1 is good for stock turbo application and have a good failsafe.

You can get a sub $400 system but without flow sensor based failsafe. You can easily spne another $150 adding a failsafe (without dash gauge).
Reply
Old Sep 1, 2009 | 02:26 PM
  #3  
coolguyuno1's Avatar
Thread Starter
Evolving Member
iTrader: (17)
 
Joined: Feb 2008
Posts: 305
Likes: 0
From: Kansas
Haha, this area is aqua mist crazed. I will never buy one at those prices!
Reply
Old Sep 1, 2009 | 03:51 PM
  #4  
Richard L's Avatar
Former Sponsor
iTrader: (5)
 
Joined: Aug 2005
Posts: 2,236
Likes: 0
From: England
Never mind
Reply
Old Sep 1, 2009 | 06:23 PM
  #5  
DBallz's Avatar
Evolved Member
iTrader: (7)
 
Joined: Sep 2004
Posts: 1,457
Likes: 0
From: South Beach, FL / Miami, FL / Pt. St. Lucie, FL / NYC
Originally Posted by coolguyuno1
Haha, this area is aqua mist crazed. I will never buy one at those prices!
Well then look forward to problems and engine failure. Not sure how much you read up but Aquamist is the best...if your worried about the $ then you should put your car back to stock.....modding an evo isn't a cheap sport.....
Reply
Old Sep 1, 2009 | 06:28 PM
  #6  
LOVEBOOOST's Avatar
Evolving Member
iTrader: (2)
 
Joined: Oct 2008
Posts: 488
Likes: 0
From: alabama
Originally Posted by DBallz
Well then look forward to problems and engine failure. Not sure how much you read up but Aquamist is the best...if your worried about the $ then you should put your car back to stock.....modding an evo isn't a cheap sport.....
totally agree dballz couldnt have said it better
Reply
Old Sep 1, 2009 | 06:52 PM
  #7  
DBallz's Avatar
Evolved Member
iTrader: (7)
 
Joined: Sep 2004
Posts: 1,457
Likes: 0
From: South Beach, FL / Miami, FL / Pt. St. Lucie, FL / NYC
Originally Posted by LOVEBOOOST
totally agree dballz couldnt have said it better
Well it's the truth most of the guys who go cheap in their mods end up with problems later and then they cry about why my car blew up. In some cases you will buy lets say an AEM meth kit then realize you need something better then you sell it for less then half what you paid and then buy a real kit like aquamist. But the OP doesn't seem to informed about these things....oh well too bad. I will be ordering my HFS-6, Howardenginerring intergarted tank, 3 port boost solenoid, and tephra mods....I love 500+ at the touch of a button
Reply
Old Sep 1, 2009 | 06:58 PM
  #8  
LOVEBOOOST's Avatar
Evolving Member
iTrader: (2)
 
Joined: Oct 2008
Posts: 488
Likes: 0
From: alabama
Originally Posted by DBallz
Well it's the truth most of the guys who go cheap in their mods end up with problems later and then they cry about why my car blew up. In some cases you will buy lets say an AEM meth kit then realize you need something better then you sell it for less then half what you paid and then buy a real kit like aquamist. But the OP doesn't seem to informed about these things....oh well too bad. I will be ordering my HFS-6, Howardenginerring intergarted tank, 3 port boost solenoid, and tephra mods....I love 500+ at the touch of a button
AHH I bet 500+ feels good much rather pay the money for a failsaife kit then a new motor all day long
Reply
Old Sep 1, 2009 | 06:59 PM
  #9  
tephra's Avatar
EvoM Guru
15 Year Member
iTrader: (6)
 
Joined: Feb 2007
Posts: 9,486
Likes: 67
From: Melbourne, Australia
yeh it can *seem* like a lot of money.

but really isn't in the long run.

how much is a turbo upgrade? exhaust? tune? etc etc...
Reply
Old Sep 1, 2009 | 07:01 PM
  #10  
TTP Engineering's Avatar
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
Originally Posted by DBallz
Well then look forward to problems and engine failure. Not sure how much you read up but Aquamist is the best...if your worried about the $ then you should put your car back to stock.....modding an evo isn't a cheap sport.....
We sent the same message via PM.

You want to save $150 but sacrifice a $5000 engine?
Reply
Old Sep 2, 2009 | 12:49 AM
  #11  
Richard L's Avatar
Former Sponsor
iTrader: (5)
 
Joined: Aug 2005
Posts: 2,236
Likes: 0
From: England
If you are quite handy with your mechanical and electrical work, you can build the following system (with failsafe) for around $400.00.

Reply
Old Sep 2, 2009 | 03:55 AM
  #12  
DBallz's Avatar
Evolved Member
iTrader: (7)
 
Joined: Sep 2004
Posts: 1,457
Likes: 0
From: South Beach, FL / Miami, FL / Pt. St. Lucie, FL / NYC
Originally Posted by TTP Engineering
We sent the same message via PM.

You want to save $150 but sacrifice a $5000 engine?
LOL I may not be a vendor or a seasoned tuner but I know going cheap will cause issues
Reply
Old Sep 2, 2009 | 07:31 AM
  #13  
TTP Engineering's Avatar
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
Originally Posted by DBallz
LOL I may not be a vendor or a seasoned tuner but I know going cheap will cause issues
Which is why we will NEVER install an AEM kit again after the first. Complete garbage.
Reply
Old Sep 2, 2009 | 02:23 PM
  #14  
coolguyuno1's Avatar
Thread Starter
Evolving Member
iTrader: (17)
 
Joined: Feb 2008
Posts: 305
Likes: 0
From: Kansas
Originally Posted by Richard L
If you are quite handy with your mechanical and electrical work, you can build the following system (with failsafe) for around $400.00.

Thanks, ill do that right now!!!.....
Reply
Old Sep 2, 2009 | 06:37 PM
  #15  
DBallz's Avatar
Evolved Member
iTrader: (7)
 
Joined: Sep 2004
Posts: 1,457
Likes: 0
From: South Beach, FL / Miami, FL / Pt. St. Lucie, FL / NYC
Originally Posted by TTP Engineering
Which is why we will NEVER install an AEM kit again after the first. Complete garbage.
Yeah I asked my builder and tuner and they will only install and tune Aquamist.
Reply



All times are GMT -7. The time now is 09:41 AM.