***Official NV Chat Thread***
So, my car keeps getting "Rejected" from smog test. On the print out It says the following:
OBD CATA LYST: Result N Not Completed
OBD EVAP: Result N Not Completed
OXY SNSR: Result N Not Completed
OBD EXHST GAS: Result N Not Completed
Any Ideas? I don't have a CEL. The only major work that was done recently (about 5 months ago) was my clutch replacement.
The car passed smog fine last year. The only difference this year would be my Hallman manual boost controller, a new radiator, and a turbo timer.
A few months back my EGR line kept popping off causing a CEL but that was resolved by zip tying the line onto the nipple.
I did however gut my cat a few months back because it was clogged.
I can't think of anything else that has change since last year..
OBD CATA LYST: Result N Not Completed
OBD EVAP: Result N Not Completed
OXY SNSR: Result N Not Completed
OBD EXHST GAS: Result N Not Completed
Any Ideas? I don't have a CEL. The only major work that was done recently (about 5 months ago) was my clutch replacement.
The car passed smog fine last year. The only difference this year would be my Hallman manual boost controller, a new radiator, and a turbo timer.
A few months back my EGR line kept popping off causing a CEL but that was resolved by zip tying the line onto the nipple.
I did however gut my cat a few months back because it was clogged.
I can't think of anything else that has change since last year..
And who did I see in front of the Valley Auto Mall yesterday afternoon?
Last edited by MarkS; Jul 30, 2011 at 03:13 PM.
So just wheel spray paint is what you suggest?
So just wheel spray paint is what you suggest?[/QUOTE]
Thats what I went with over powder coat .. I took them to 6651 customs, had them back that same.day. snail wanted to keep my rims for a week to finish them. I payed 80 a wheel to get painted and they came out good.
Thats what I went with over powder coat .. I took them to 6651 customs, had them back that same.day. snail wanted to keep my rims for a week to finish them. I payed 80 a wheel to get painted and they came out good.
Heat changes the structure of metals, that is fact. BBS wheels are known to crack if the curing temperature is too high. He has powdercoated Rota, Volk(rays), BBS, Enkei, and tons of others and has yet to have a wheel break after coating, though....so you shouldn't be too worried.
my wheels are NOT powder coated just automotive finish and i never had problem.... just a thought for some of yous! eventually you will get chips due to driving around i just use black nail polish for touch up
...
...
If you need a tune let us know. If you just want a little touch up reflash on the street, it won't be too much.
https://www.evolutionm.net/forums/ve...uilds-etc.html