WORKS High-Flow Air Filter
Well its time for me to clean my filter and I am curious just how much oil I need to use for the process. Do I apply light oil on one side of the filter where it gets dirty or both sides?
Originally Posted by Jamie@WORKS
Only apply a light coat of oil to the "dirty" side of the filter after it has been cleaned.
One more question if you don't mind, but do I use the air filter cleaner on just the 'dirty' side or both?
"To date, in a period in which K&N has sold over 5 million filters, 52 sensors were sent in for further evaluation. Not one of these suspected MAF sensors sent in for laboratory evaluation was shown to have failed due to contamination from K&N filter oil."
http://www.knfilters.com/MAF/massair.htm
-- DavidV
http://www.knfilters.com/MAF/massair.htm
-- DavidV
Just cleaned and re-oiled my WORKS filter last nite. Very impressed with its particle capturing ability. I could have grown tomatos in the dirt that came out!
Good stuff. It flows great and filters well. It WORKS!
Good stuff. It flows great and filters well. It WORKS!
Originally Posted by 3mta3
Just cleaned and re-oiled my WORKS filter last nite. Very impressed with its particle capturing ability. I could have grown tomatos in the dirt that came out!
Good stuff. It flows great and filters well. It WORKS!
Good stuff. It flows great and filters well. It WORKS!


