Mark T

I'm on my second set of Racing Brake rotors with both sets I have experienced steering wheel vibration under braking 60 mph >. The first set made it about 3k miles the second 7k. Anyone else with a similar experience?
Whats the solution? ( run out on the first set was .05-.07)

GOKOU

iTrader: (2)

What pads are you using??

Mark T

ferrodo 2500

Mark T

anyone else?

Drifto

iTrader: (6)

I have vibration, but I chocked it up to pad material built up on the rotor. I have tried to rebed the pads but to no avail. Guess I will have to sand the rotors. I have DS2500's and Baer two piece rotors. What rotors do you have?

Mark T

Racing Brake

Drifto

iTrader: (6)

Oops. I read that in your first post , but did not realize that that was the name.

Kuba23

iTrader: (4)

Hey man i have the racingbrakes with the HAWK racing pads they are trully amazing ive done some hard braking to the point where the brakes were smoking everytime they stop 100 % better then stock brakes and i havent had any vibration I did experience vibration on my stock setup due to a bent rim make sure that your allignment is all good and ur wheels arent bent Take care

Mark T

Thankyou

sdoow

iTrader: (8)

I understand this thread is from a while ago, but we have received another report similiar to this involving an STi. We have written an response for everyone to read:
http://www.racingbrake.com/main/pad_warning.asp

javid

I am the STi owner that has had a similar problem using the CarboTech XP pads.
http://forums.nasioc.com/forums/showthread.php?t=936395

Unfortunately, discussion of my particualr problem (with the owner of RB) has come to an end.

I will be adding to my parts review thread on Nasioc as well as providing a review on our team web site www.trackmonkeyracing.com shortly.