https://www.evolutionm.net/forums/sh...light=retrofit

 

ralliarv....so do your housings use the E46 or the FX35/45?

 

Fx with forground limiter removed and sheild mod for color. You could also do the TSX lense swap on the FX for super sharpness

 

could I see a wall shot of the ebay projectors on a flat wall I'm just curious

 

hey guys got a question. i have the ebay projectors too and i'm running hids. one of them went out. thats just a bad bulb right and not the entire kit?

 

kit boys are a no no..

do it right.





retro w/ oem

 

check the latest on here: https://www.evolutionm.net/forums/sh...=289354&page=2
I'll let ya'll know if I get the adjustment motor to work.
Give me a month or less....

 

Put in the bulbs that it came with and you'll see if its the headlight or the HID kit itself. Most likely it is the HID ballast.

 

^so you're saying its probably the ballast that went bad and not the bulb? i will take a better look at it in the morning. thanks for the help.

 

^^You can usually tell by looking at the hid bulb if it is burned out. The glass sphere where the light emits from will be cloudy or black if it is burned out. If it is clear, then it is the ballast.
You can also try switching the bulbs and seeing if the good bulb ignites on the questionable ballast.
I prefer method one as to you don't want to put your good bulb at risk by connnecting it to a bad ballast, but it's your lights.

 

Are these TSX's?

 

Looks good man

 

so i went out and took a look. i turned my headlights on without starting the car up and it looked like it was trying to light up. i could hear a clicking sound too. then i turned my car on and it started working fine again. wierd...

i'm starting to think its not the kit thats bad but most likely the headlights.

 

When you say "headlights" what do you mean? I don't see anything that would be in the lenses that would effect your hid kit.

 

so its definitely the kit then huh? it looks like its fine for now. i'm gonna wait and see what happens in a few days.