Looking for Aftermarket parts
Thread Starter
Newbie
Joined: Feb 2015
Posts: 26
Likes: 0
From: Ohio
Looking for Aftermarket parts
Looking for aftermarket performance parts ! Need help I'm new to these forums someone help me . Anyone have decent coilovers for sell
Last edited by VMC216007; Feb 12, 2015 at 05:52 PM.
Evolving Member
Joined: May 2014
Posts: 127
Likes: 0
From: Jacksonville, N.C.
Start by going to the for sale listings in the forums or go to http://roadracemotorsports.com/ try searching Amazon also... found some neat stuff there as well
rods are easy...any 7-bolt 4G63 rods fit, same with head studs, mains, and bearings...pistons are a bit different because of the larger bore, so stroker pistons won't work, but wiseco makes pistons for the 4G69, but they are made to order, though they are not listed in this year's catalogue...you COULD buy them from roadracemotorsports if you want to pay $900 for pistons, when 4G63 pistons cost around $600...
for coilovers, Tein only offers their street basis for our chassis which are not spring rate or damper adjustable...D2 coilovers are fully damper and spring rate adjustable, but they cost nearly double...if you want to go "hellaflush" and sacrifice comfort and actual performance via tunable suspension, then just get the Teins...don't buy from road race, they're cheaper everywhere else...
for coilovers, Tein only offers their street basis for our chassis which are not spring rate or damper adjustable...D2 coilovers are fully damper and spring rate adjustable, but they cost nearly double...if you want to go "hellaflush" and sacrifice comfort and actual performance via tunable suspension, then just get the Teins...don't buy from road race, they're cheaper everywhere else...
Thread Starter
Newbie
Joined: Feb 2015
Posts: 26
Likes: 0
From: Ohio
rods are easy...any 7-bolt 4G63 rods fit, same with head studs, mains, and bearings...pistons are a bit different because of the larger bore, so stroker pistons won't work, but wiseco makes pistons for the 4G69, but they are made to order, though they are not listed in this year's catalogue...you COULD buy them from roadracemotorsports if you want to pay $900 for pistons, when 4G63 pistons cost around $600...
for coilovers, Tein only offers their street basis for our chassis which are not spring rate or damper adjustable...D2 coilovers are fully damper and spring rate adjustable, but they cost nearly double...if you want to go "hellaflush" and sacrifice comfort and actual performance via tunable suspension, then just get the Teins...don't buy from road race, they're cheaper everywhere else...
for coilovers, Tein only offers their street basis for our chassis which are not spring rate or damper adjustable...D2 coilovers are fully damper and spring rate adjustable, but they cost nearly double...if you want to go "hellaflush" and sacrifice comfort and actual performance via tunable suspension, then just get the Teins...don't buy from road race, they're cheaper everywhere else...
RPW sells camshafts. They are in Australia though. Keep in mind the prices on their website are AUD not USD. Or you could get a custom regrind from someone like Crower.
There are a few different brands that offer coilovers for our car. TruthDweller has the Tein's I believe. Smike had good reviews of the Megan Racing coilovers. I think Raikiri used BC Racing Coilovers. So there are good reviews of several brands.
Here are some piston part numbers I found:
K992M870A - listed as CR of 8.5-9.5:1
K992M870B - CR of 10.5:1
KMI11020 - CR of 9:1
Welcome to the forums.
There are a few different brands that offer coilovers for our car. TruthDweller has the Tein's I believe. Smike had good reviews of the Megan Racing coilovers. I think Raikiri used BC Racing Coilovers. So there are good reviews of several brands.
Here are some piston part numbers I found:
K992M870A - listed as CR of 8.5-9.5:1
K992M870B - CR of 10.5:1
KMI11020 - CR of 9:1
Welcome to the forums.
Trending Topics
Thread Starter
Newbie
Joined: Feb 2015
Posts: 26
Likes: 0
From: Ohio
RPW sells camshafts. They are in Australia though. Keep in mind the prices on their website are AUD not USD. Or you could get a custom regrind from someone like Crower.
There are a few different brands that offer coilovers for our car. TruthDweller has the Tein's I believe. Smike had good reviews of the Megan Racing coilovers. I think Raikiri used BC Racing Coilovers. So there are good reviews of several brands.
Here are some piston part numbers I found:
K992M870A - listed as CR of 8.5-9.5:1
K992M870B - CR of 10.5:1
KMI11020 - CR of 9:1
Welcome to the forums.
There are a few different brands that offer coilovers for our car. TruthDweller has the Tein's I believe. Smike had good reviews of the Megan Racing coilovers. I think Raikiri used BC Racing Coilovers. So there are good reviews of several brands.
Here are some piston part numbers I found:
K992M870A - listed as CR of 8.5-9.5:1
K992M870B - CR of 10.5:1
KMI11020 - CR of 9:1
Welcome to the forums.
http://www.importperformanceparts.ne...itsubishi.html hit Ctrl+F paste the part number...or it's about 2/3 down the page...
Thread
Thread Starter
Forum
Replies
Last Post
Racer RS X
Private 'Evo 1 - 9' For Sale / Wanted
2
Apr 19, 2005 05:21 AM