2009 Lancer Ralliart Bulb List

Subscribe
May 27, 2009 | 06:39 AM
  #1  
- The bulb should only be replaced with a new bulb with the same rating and type. The type and rating are listed on the base of the bulb.


OUTSIDE


Front turn signal light ---- 21W WY21W
Headlight, high Beam -----60W 9005 HB3
Headlight, low Beam ------51W 9006 HB4
Front foglight --------------55W H11
Front side-marker and parking light -----5 W WY5W
Side Turn Signal -----------* NOTE it is not possible to repair or replace only the bulb for the side turn-signal light, check with your dealer.

For Vehicles with HID'S ( high intensity discharge headlights or projectors)


Front Turn signal light-----21W WY21W

Daytime running light ------27W 32 CP 1156
Headlight, low/high beam ( HID )------35W ------
front foglight ---------55W H11
Front Side-marker and parking light -------5W WY5W
Side turn Signal --------? -------? * NOTE it is not possible to repair or replace only the bulb for the side turn-signal light, check with your dealer.



REAR

High-mounted stop light ????????
License Plate light------5W W5W
Back up light-----------21W 7440
Tail light---------5W W5W
Tail and stoplight -------21/5W 7443
Rear Turn signal -------21W 7440
Rear side marker ------5W W5W


Trunk Area ( INSIDE )

Trunk area -----5W ?
Dome light Rear is so equipped ----8w ?
Dome light front ( reading light ) ---8W ?

***For vehicles eqipped with a turbo charger, when replacing the bulb on a drivers side, eremove the bolt holding down the replay box and move the replay box toward the rear of the vehicle

***For vehicles equipped with a turbo charger, when replacing the bulb on passengers side, lift up the engine coolant reservoir.
Reply 0
May 27, 2009 | 06:44 AM
  #2  
mods please sticky this ^^^
Reply 0
May 27, 2009 | 09:35 AM
  #3  
if people would already read the sticky's that are up

https://www.evolutionm.net/forums/09...-mod-list.html

you wouldnt have to sticky this..hahahaha
Reply 0
May 27, 2009 | 10:07 AM
  #4  
Quote: if people would already read the sticky's that are up

https://www.evolutionm.net/forums/09...-mod-list.html

you wouldnt have to sticky this..hahahaha

yeah it was me as well who posted that for the 2008 lancer bulb list, but for the ralliart its a little different. because it has the option of the HIDS.
Thats why i took the time to type it up again for the 2009 ralliarts sake
Reply 0
May 28, 2009 | 06:04 AM
  #5  
Quote: [B][U]
Side Turn Signal -----------* NOTE it is not possible to repair or replace only the bulb for the side turn-signal light, check with your dealer.
[/I]


yeah I was wondering about this....one day I was bored and I took out the side turn signal but I realized the bulb is enclosed in the case and it didnt seem like you could open up the case....man if that bulb ever goes out the dealer would probably charge like 15 bucks for that case
Reply 0
May 28, 2009 | 06:41 AM
  #6  
Quote: yeah I was wondering about this....one day I was bored and I took out the side turn signal but I realized the bulb is enclosed in the case and it didnt seem like you could open up the case....man if that bulb ever goes out the dealer would probably charge like 15 bucks for that case
yeah i know.. i didnt take mine out yet to see how it looks like.. But that info was taken from the manual.
Reply 0
May 30, 2009 | 11:14 PM
  #7  
Wy21w
Does anyone know a site where you can purchase the WY21W bulbs in a color other than amber. Preferably Blue or white. This is for the Ralliarts Front turn signal light. didnt see any on ebay.
Reply 0
Jun 1, 2009 | 07:26 PM
  #8  
does anyone know if you can change the 1156 bulb for an LED and if so, what wattage?
Reply 0
May 31, 2010 | 08:09 PM
  #9  
can i use 35w h11 hid for the the fog lights?
Reply 0
Jul 23, 2010 | 11:47 AM
  #10  
Has anyone tried using 7440 bulbs instead of WY21W bulbs in their front turn signals? I know the bulbs are pretty similar but I'm not sure if they will work.
Reply 0
Jul 24, 2010 | 05:02 PM
  #11  
does anyone know the RA interior light specs? Like my dome lights and front map reading lights
Reply 0
Jul 26, 2010 | 02:05 PM
  #12  
Quote: Has anyone tried using 7440 bulbs instead of WY21W bulbs in their front turn signals? I know the bulbs are pretty similar but I'm not sure if they will work.
FYI I went ahead and ordered 7440 bulbs and they are a perfect fit.
Reply 0
Jul 27, 2010 | 08:44 PM
  #13  
Has anyone ever swapped the H11 to a H9 foglight. I have read that the bulbs have a very similar base. Small sufferance that could be adjusted. To make fit. Also only pulls .5 amps more than the stock bulb but much much brighter.
Reply 0
May 13, 2011 | 08:02 AM
  #14  
noob Q, I want to replace the reverse lights with LED bulbs and the OEM bulbs are 21w 7440, the LEDs that Im looking at are 2.5w 7440. Does bulb wattage matter? thanks
Reply 0
May 13, 2011 | 08:07 AM
  #15  
for reverse function, there shouldn't be any issues. it's the turn-signals that freak out when you use led's without an additional resistor
Reply 0