*Promising EVO Ralliart Style Lip for the RA made by JDP Engineering
#1
Evolving Member
Thread Starter
iTrader: (2)
Join Date: Sep 2008
Location: Toronto
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
*Promising EVO Ralliart Style Lip for the RA made by JDP Engineering
Pricing for this lip (priced to ship within the US)
-$340 + shipping (shipping usually is $60) for carbon, and fiberglass will be $260 + shipping ($60)
***Update***
Hello,
*
First off, I would like to thank you for the opportunity and support for allowing me (JDP engineering)*to be a part of this new creation.* As you may already know and have seen, the first lip has been completed and test fitted.*
*
Fitment is perfect..no gaps.* The lip will come with all necessary hardware to mount to your bumper...no double sided tape will be used or is necessary for installation.* Attached is a picture of the final product just in case you haven't seen it.* In the picture, the upper section of the lip has a shadow which may give the impression there's a slight gap....there isn't.* The lip sits*completely flush to your bumper.**
*
In regards to your order, I will be fulfilling orders in the order of the list below (provided to me by Long and Steve).* Upon completion of your lip, I will email you to submit your remaining balance.* A tracking number will be provided as it is shipped.*
*
As Long and/or Steve mentioned, the final price will be $340 USD + shipping.* Shipping within the US will be $60.* If you're located elsewhere, please send me an email so that I can provide you with an accurate shipping quote.* All shipments will be insured.* I'm anticipating to produce 2 lips per week.* Most likely it'll be more than 2 per week...but I don't want to over promise anything.
*
--
John
JDP ENGINEERING
www.jdpengineering.com
Phone: 323-327-2036
Here is Steve's car with the mock up:
THe 10 deposits are in!! Production will begin this week when sstevojr drops his car off on weds!
We now have the 10 thanks to Ryan!
Please Pm me when you have made your deposits!
Emails Received from:
1. sstevojr PAID
2. aaronk PAID
3. testmonkey PAID
4. KuuPAID
5. Slyy PAID
6. initial_d2kPAID
7. adogPAID
8. SudzRAPAID
9 bye2uPAID
10. nyczlegacyPAID
11. BlackTrackPAID
May 20, 2011 - Emails have all been sent out.
----------------------------------------------------
I know we had a thread with a company that was going to start producing the scorpion lip for us and never came through.
I was browsing through some evo x lips and i saw a company that made some really good lips that required no modifications to install and looks flawless.
Long story short, i emailed them and inquired about them making a lip for our RA and they agreed to produce one for us!
I'm sure some of you have heard of this company.
http://www.jdpengineering.com/
The only thing we need is someone willing to drop off their car at JDP Engineering for 3 days MAX. JDP just need to mold the lip to fit AND this person will get the lip for a "MAJOR" discounted price.
JDP will post pictures up when the prototype is complete.
The lip will be available in Carbon or Fiberglass.
JDP Engineering is located in Alhambra/Pasadena, CA
Anyone close to them willing to do this?
I would drop off my car; but I'm located in Canada
What the lip will somewhat look like:
Pricing for this lip (priced to ship within the US)
-$340 + shipping (shipping usually is $60) for carbon, and fiberglass will be $260 + shipping ($60)
John
JDP ENGINEERING
www.jdpengineering.com
Phone: 323-327-2036
-$340 + shipping (shipping usually is $60) for carbon, and fiberglass will be $260 + shipping ($60)
***Update***
Hello,
*
First off, I would like to thank you for the opportunity and support for allowing me (JDP engineering)*to be a part of this new creation.* As you may already know and have seen, the first lip has been completed and test fitted.*
*
Fitment is perfect..no gaps.* The lip will come with all necessary hardware to mount to your bumper...no double sided tape will be used or is necessary for installation.* Attached is a picture of the final product just in case you haven't seen it.* In the picture, the upper section of the lip has a shadow which may give the impression there's a slight gap....there isn't.* The lip sits*completely flush to your bumper.**
*
In regards to your order, I will be fulfilling orders in the order of the list below (provided to me by Long and Steve).* Upon completion of your lip, I will email you to submit your remaining balance.* A tracking number will be provided as it is shipped.*
*
As Long and/or Steve mentioned, the final price will be $340 USD + shipping.* Shipping within the US will be $60.* If you're located elsewhere, please send me an email so that I can provide you with an accurate shipping quote.* All shipments will be insured.* I'm anticipating to produce 2 lips per week.* Most likely it'll be more than 2 per week...but I don't want to over promise anything.
*
--
John
JDP ENGINEERING
www.jdpengineering.com
Phone: 323-327-2036
Here is Steve's car with the mock up:
THe 10 deposits are in!! Production will begin this week when sstevojr drops his car off on weds!
We now have the 10 thanks to Ryan!
Please Pm me when you have made your deposits!
Emails Received from:
1. sstevojr PAID
2. aaronk PAID
3. testmonkey PAID
4. KuuPAID
5. Slyy PAID
6. initial_d2kPAID
7. adogPAID
8. SudzRAPAID
9 bye2uPAID
10. nyczlegacyPAID
11. BlackTrackPAID
May 20, 2011 - Emails have all been sent out.
----------------------------------------------------
I know we had a thread with a company that was going to start producing the scorpion lip for us and never came through.
I was browsing through some evo x lips and i saw a company that made some really good lips that required no modifications to install and looks flawless.
Long story short, i emailed them and inquired about them making a lip for our RA and they agreed to produce one for us!
I'm sure some of you have heard of this company.
http://www.jdpengineering.com/
The only thing we need is someone willing to drop off their car at JDP Engineering for 3 days MAX. JDP just need to mold the lip to fit AND this person will get the lip for a "MAJOR" discounted price.
JDP will post pictures up when the prototype is complete.
The lip will be available in Carbon or Fiberglass.
JDP Engineering is located in Alhambra/Pasadena, CA
Anyone close to them willing to do this?
I would drop off my car; but I'm located in Canada
What the lip will somewhat look like:
Pricing for this lip (priced to ship within the US)
-$340 + shipping (shipping usually is $60) for carbon, and fiberglass will be $260 + shipping ($60)
John
JDP ENGINEERING
www.jdpengineering.com
Phone: 323-327-2036
Last edited by Slyy; Aug 14, 2011 at 08:39 AM.
Trending Topics
#9
Evolved Member
iTrader: (7)
Join Date: Sep 2010
Location: 805-Conejo Valley
Posts: 2,558
Likes: 0
Received 0 Likes
on
0 Posts
I thought I was scraping as well, but on Sunday I was changing my oil after running at the track all day (;p), and noticed its not the lip, but the the under-panel. Those two piece of plastic that stick down from the under-panel (some sort of aerodynamic I'm assuming) are whats getting chewed up. Actually it kinda works out, cuz when I hear those scraping, I know I'm close to the actual lip touching, its kinda like an "alarm", haha!
#11
Evolved Member
iTrader: (4)
i wish we could get a like similar to the Evo X Jun Lip, a lip that covers over the bottom of the bumper all the way across. Here is a pic
http://3.bp.blogspot.com/_NRSDCBt4i-.../JUN-LIP-3.jpg
http://1.bp.blogspot.com/_NRSDCBt4i-.../JUN-LIP-5.jpg
http://3.bp.blogspot.com/_NRSDCBt4i-.../JUN-LIP-3.jpg
http://1.bp.blogspot.com/_NRSDCBt4i-.../JUN-LIP-5.jpg
Last edited by total0wnage; May 17, 2011 at 05:43 PM.
#12
Evolving Member
Thread Starter
iTrader: (2)
Join Date: Sep 2008
Location: Toronto
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
Everyone has their own taste on what kind of lips they want; but it's impossible to have any type of choices if there isn't a company out there producing lips for us period.
Personally there is a few designs out there i would love to have; but i have yet to see any company produce. The design on this lip i wouldn't mind; it actually looks good.
Also, i think JDP is agreeing to do this for us simply because they have the mold from the EVO X and with some modifications and they'll make it fit our RA's.
Anyways, who's in for this? seriously? Going to need $50 deposit to start the production and someone to drop their car off
Personally there is a few designs out there i would love to have; but i have yet to see any company produce. The design on this lip i wouldn't mind; it actually looks good.
Also, i think JDP is agreeing to do this for us simply because they have the mold from the EVO X and with some modifications and they'll make it fit our RA's.
Anyways, who's in for this? seriously? Going to need $50 deposit to start the production and someone to drop their car off
Last edited by Slyy; May 17, 2011 at 06:18 PM.
#13
Evolved Member
iTrader: (4)
Everyone has their own taste on what kind of lips they want; but it's impossible to have any type of choices if there isn't a company out there producing lips for us period.
Personally there is a few designs out there i would love to have; but i have yet to see any company produce. The design on this lip i wouldn't mind; it actually looks good.
Also, i think JDP is agreeing to do this for us simply because they have the mold from the EVO X and with some modifications and they'll make it fit our RA's.
Anyways, who's in for this? seriously? Going to need $50 deposit to start the production.
Personally there is a few designs out there i would love to have; but i have yet to see any company produce. The design on this lip i wouldn't mind; it actually looks good.
Also, i think JDP is agreeing to do this for us simply because they have the mold from the EVO X and with some modifications and they'll make it fit our RA's.
Anyways, who's in for this? seriously? Going to need $50 deposit to start the production.