Notices

2009 Ralliart - Brake Guide

Thread Tools
 
Search this Thread
 
Old Jul 3, 2009 | 07:05 AM
  #16  
ReaperSevero's Avatar
Newbie
 
Joined: Apr 2009
Posts: 80
Likes: 0
From: Winnipeg, Manitoba, Canada
So has anyone verified this? Are there any good systems out there?? What is the correct numbers for EBC yellowstuff wouldn't mind getting a set.
Reply
Old Jul 3, 2009 | 09:18 AM
  #17  
japan101's Avatar
Evolving Member
iTrader: (1)
 
Joined: Feb 2009
Posts: 373
Likes: 1
From: CT
I went on Ksport's site and it only says Lancer 02-up for brake kits. Unless I looked in the wrong spot can you show exactly where it says Ralliart?
Reply
Old Jul 4, 2009 | 07:27 AM
  #18  
Talonralliart's Avatar
Newbie
 
Joined: Jun 2009
Posts: 51
Likes: 0
From: Ont. Canada
Anymore word on these kits? I have been to the Robispec and K sport site and could not find a kit for the Ralliart. Wish Brembo would just do one.
Reply
Old Jul 4, 2009 | 08:49 AM
  #19  
tjac357's Avatar
Evolved Member
iTrader: (1)
 
Joined: Apr 2009
Posts: 617
Likes: 0
From: Ohio
Originally Posted by japan101
I went on Ksport's site and it only says Lancer 02-up for brake kits. Unless I looked in the wrong spot can you show exactly where it says Ralliart?
it took like 5 phone calls to k sport trying to verify what the service rep said, and the tech guy said it doesn't fit. they tried telling me the GTS kit would fit but after everyone else said it wouldn't i had to make a few phone calls and eventually got them to confirm there's won't fit either
Reply
Old Jul 4, 2009 | 09:32 PM
  #20  
japan101's Avatar
Evolving Member
iTrader: (1)
 
Joined: Feb 2009
Posts: 373
Likes: 1
From: CT
Alright then, it is settled at least for now that Ksport doesnt have anything for us. I am gonna go ahead and wait for the Robi break kit that is on the way down the pipeline. Thank you for verifying.
Reply
Old Aug 4, 2009 | 08:54 PM
  #21  
LancerGTS's Avatar
Evolved Member
 
Joined: Apr 2007
Posts: 631
Likes: 0
From: Long Beach, CA
I finally got the correct part number for the front pads. WORKS has their rally Ralliart and has been a great help to me in getting parts.

Front pads on the way! Redline Time Attack in October will be awesome now
Reply
Old Aug 5, 2009 | 12:55 AM
  #22  
NASTYxNAT3's Avatar
Evolving Member
 
Joined: Mar 2009
Posts: 185
Likes: 0
From: Norcal
^share! ahaha
Reply
Old Aug 7, 2009 | 02:00 AM
  #23  
robi's Avatar
Former Sponsor
iTrader: (24)
 
Joined: Aug 2003
Posts: 1,614
Likes: 0
From: socal
I have a full kit out it has a larger cryo treated front rotor Brakeman F3 calipers, the rear has the brakeman f1 calipers the kits are 2100 with lines you can get aggressive street or 1 of 3 levels of race pads. info @robispec.com. PS WILL NOT FIT USING STOCK WHEELS need spacers or wheels with larger caliper clearance...this system also allows 17" wheels...
Reply
Old Aug 19, 2009 | 07:15 AM
  #24  
otter's Avatar
Thread Starter
EvoM Administrator
20 Year Member
Liked
Loved
Community Favorite
iTrader: (14)
 
Joined: Jun 2004
Posts: 8,624
Likes: 13
From: Seat 8A
Originally Posted by ReaperSevero
So has anyone verified this? Are there any good systems out there?? What is the correct numbers for EBC yellowstuff wouldn't mind getting a set.
I recently checked a couple manufacturers, now that they're adding the car to their application lists. The numbers at the top are correct. The new Ralliart uses the same pads as the GTS and old Ralliart.
Reply
Old Sep 6, 2009 | 07:07 AM
  #25  
perryrace's Avatar
Newbie
iTrader: (1)
 
Joined: Aug 2009
Posts: 25
Likes: 0
From: san antonio
Carbotech now has pads for our car (09 Ralliart) I fitted these pads to my car yesterday so I am 100% certain they fit.

Fronts are part number CT530-1521 (this is the street pad other compounds available)
Rears are part number CY868-1521 (this is the street pad other compounds available)

Significant improvement in pedal feel, modulation and braking distance.
Reply
Old Sep 20, 2009 | 05:13 PM
  #26  
billyboy1's Avatar
Evolved Member
 
Joined: Apr 2009
Posts: 562
Likes: 0
From: Adelaide, Australia
Originally Posted by tjac357
for clarification the evo brembo's won't fit on the ralliart they have a different setup. the only company that i found that offers a big brake kit for the R/A is k sport. with 18" rims it's not recommended to go above 14" rotors and 13" are most common
do anyone know why this is actually so? is it to do with the ralliart's oem wheels or other things?
Reply
Old Sep 22, 2009 | 01:53 PM
  #27  
majinfajita's Avatar
Evolving Member
 
Joined: Jun 2009
Posts: 353
Likes: 0
From: Calgary, AB
Originally Posted by otter
I recently checked a couple manufacturers, now that they're adding the car to their application lists. The numbers at the top are correct. The new Ralliart uses the same pads as the GTS and old Ralliart.
Have these part numbers been corrected since the snafu that LancerGTS went through?

Originally Posted by LancerGTS
Just an fyi - the EBC codes are wrong. Bought the yellow stuff and they do not fit.
Reply
Old Oct 6, 2009 | 06:15 PM
  #28  
evo_soul's Avatar
Former Sponsor
 
Joined: Jul 2007
Posts: 2,362
Likes: 1
From: the land between lancer and evo
Is there a final update to the compatibility issue with the GTS?

Cheers
Reply
Old Dec 11, 2009 | 03:37 PM
  #29  
laksman91's Avatar
Evolved Member
iTrader: (4)
 
Joined: Jan 2009
Posts: 578
Likes: 0
From: Toronto, Canada
http://www.lancershop.com/customer/home.php?cat=190 has some information regarding part #s
Reply
Old Dec 12, 2009 | 10:18 AM
  #30  
Ladogaboy's Avatar
Evolved Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 1,127
Likes: 0
From: CA
If that is the proper part #, then we do share rear brakes with the 2007+ Outlander. Good luck finding performance pads. :-/
Reply



All times are GMT -7. The time now is 08:09 PM.