any update please?? want new rotors and pads all around!!!

 

Yeah. It looks like, based on what everyone has been saying, the front page can be updated.

People have fitted D866 front and D868 rear.

That means that we share rear pads with the Endeavor, 2008+ Lancer GTS, 2001+ Montero, and the 2007+ Outlander.

I wonder if that means we can use the upgraded rear rotors from the GTS too.

 

as far as I know the rotors are the same as the GTS. but the pads, there are conflicted reports.

 

Until LancerGTS responds with more details about the EBC brake pads he ordered, there will be conflicting information. He never said which pads (the wrong ones) he ordered in the first place, and he didn't mention whether he had been sent the wrong pads by mistake. When he got the right pads, which did fit (apparently), he never mentioned what part number they were.

Based on perryrace's post, Carbotech has pads for us, and according to their website, they are the same as for the GTS. And perryrace claimed to have installed them on the car with no issues.

 

Okay, I found the problem: EBC mislabeled the vehicles in their parts catalog. The RalliArt is listed as the "2.0 GTS" Lancer:

Front pad:
D866/UD866/ DP21614/DP31614C/DP41614R

Front rotor:
#7380 11.6"
UPR Series OEM Replacement, GD Series, and USR Series are available.

Rear pad:
D868/DP21407/DP31407C/DP41407R

Rear rotor:
#7441 11.9"
UPR Series OEM Replacement, GD Series, and USR Series are available.

This also matches the information perryrace provided in regards to Carbotech's offerings (which he says fit perfectly):

Front: CT866
Rear: CT868

 

So the 866 Front and 868 are correct for the 08+ RA?

Then they are the same as the GTS?

 

It's pretty much up to you guys to confirm whether or not the part numbers are correct. I don't have a 09+ Ralliart. All one of you has to do is confirm the part number of what you've found to fit and this would all be cleared up. The info I posted is what I found from some quick searching and catalog cross-references. If someone has confirmed info, either for or against what I posted, let me know (via PM, I don't read all threads all the time) and I can correct/confirm the info in the first post.

I can't spoon-feed every bit of info to people.

 

Almost 1 yr later and its still not 100% official, lol. This feels like one of those Unsolved Mystery cases.

 

A quick check at a couple online retailers, such as AJusa.com, show that my info for the front is correct. I haven't seen anybody come out and show that my info is wrong.

 

The front pads are the same; the rear pads are different.

And otter, your info isn't wrong, but we still don't have info on the rear pads on the front page yet.

 

Has anyone verified this, looking for new HPS pads for friends 2009 RalliArt.

THanks,

NEWB

 

Project U seems to have 3 type of Brake pads for the CY4A Ralliart
HC+, B-Spec and NS

http://www.project-mu.co.jp/en/products/index.html

Front: F533


Rear: T505

Maybe someone can locate a P.Mu Dealer?

 

what is the difference between dp31614c and dp41614c for the front?
what is the difference between dp31407c and dp41407c for the rear?

 

CORRECT EBC REDSTUFF:

Front EBC Redstuff: DP3954C
Rear EBC Redstuff: DP31407C

I have them on my car now.

More Pad Info:
Front FMSI # D530
Rear FMSI # D868

 

updated with the new numbers