2009 Lancer Ralliart - GST Basemap
Newbie
Joined: Aug 2012
Posts: 19
Likes: 0
From: Hortonville
just ordered GST boost pill, some nice lady picked up phone, they are not taking orders online anymore, just let you guys know. because some people are saying that GST boost pill is different than ams, or UR. i'm not sure but just to be safe, i ordered directly from GST~~~~ $32 well spent.
Newbie
Joined: Nov 2012
Posts: 21
Likes: 0
From: Savannah, GA
So im trying to log my 09 ralliart with evoscan and im unsucessful. Here is what i have done so far, I have evoscan with an open port 2.0. i selected CAN 2006+/evox and chose Mode23 2010 USA MR/Lancer RA EVOX. i dont know if this is the right one. i selected all the goodies i want to logg and get the car to the slowest in 3rd gear. start the data logger and did a full pull on 3rd until redline. when i see my log TPS never gets to 100 and boost is always at -14.5.... what am i missing or what am i doing wrong?
Did you reflash the car with the proper mode 23 enabled rom? Also check that you have the proper definition file loaded into evoscan. I had issues and had to put the definitions into the proper folder in evoscan manually.
Newbie
Joined: Aug 2012
Posts: 19
Likes: 0
From: Hortonville
Ok so I flashed my 2012 ralliart to the stock gst basemap with no mods as I don't have any other than an evo x bov. I did 3 3rd gear pulls logging with evoscan and the highest my tps says is 87.6 or somthing it never shows 100% throttle???
anyone know why this happens? I am VERY new to logging so am I missing a setting or somthing?
anyone know why this happens? I am VERY new to logging so am I missing a setting or somthing?
Thread Starter
Joined: Aug 2003
Posts: 14,094
Likes: 1,093
From: Mid-Hudson, NY
Ok so I flashed my 2012 ralliart to the stock gst basemap with no mods as I don't have any other than an evo x bov. I did 3 3rd gear pulls logging with evoscan and the highest my tps says is 87.6 or somthing it never shows 100% throttle??? anyone know why this happens? I am VERY new to logging so am I missing a setting or somthing?
anyone know why this happens? I am VERY new to logging so am I missing a setting or somthing?
Thread Starter
Joined: Aug 2003
Posts: 14,094
Likes: 1,093
From: Mid-Hudson, NY
Evolving Member
Joined: Sep 2011
Posts: 175
Likes: 0
From: Sydney
I've had enough with the noise of a tbe, changed back to stock muffler . It feels like a person going to the loo being constipated or a huge ***** up it rear end. Anyway I get knock sum of 3 and 4 at low rpm and load occasionally. Do I just adjust high octane timing map down a bit for that rpm range?
Evolving Member
Joined: Jul 2009
Posts: 222
Likes: 0
From: Canada
I've had enough with the noise of a tbe, changed back to stock muffler . It feels like a person going to the loo being constipated or a huge ***** up it rear end. Anyway I get knock sum of 3 and 4 at low rpm and load occasionally. Do I just adjust high octane timing map down a bit for that rpm range?
Newbie
Joined: Jun 2013
Posts: 30
Likes: 0
From: Minnesota
Just wondering if anyone else is running the 2013 base map? If so what kind of numbers are you getting out of it?
We have a new set of Base Maps. 
v31.003 Base Maps
This includes "stockpill" tunes for USDM 2013. I would very much appreciate it if somebody could do some "extended" logging of the 2013 ROM in action, following the directions found in this PDF. Thanks. This is for RAX Patch testing, and needs to happen before any "boostpill" or "TBE" version is released. THIS IS For THE NEW 2013 ROM ONLY - no need to mess about with the pdf or extra testing on established ROMs.
For those updating from v31.001, the changes in this ROM set are as follows:
As you can see, this is mostly about P050B and 2013.
PLEASE double-check your selection - stockpill vs. boostpill, 91oct vs. 93oct, etc. All the ROMs are in one zipfile, so choose carefully.
Cheers,
Rich
v31.003 Base Maps
This includes "stockpill" tunes for USDM 2013. I would very much appreciate it if somebody could do some "extended" logging of the 2013 ROM in action, following the directions found in this PDF. Thanks. This is for RAX Patch testing, and needs to happen before any "boostpill" or "TBE" version is released. THIS IS For THE NEW 2013 ROM ONLY - no need to mess about with the pdf or extra testing on established ROMs.
For those updating from v31.001, the changes in this ROM set are as follows:
- Removed the "P050B DTC Disable" change, as it didn't seem to be 100% effective.
- Revised the "Lower Boundary Timing Map" to stop P050B from happening on cold start.
- Removed a small tweak to "1st Gear TPS Limiter (Drive)" at 1500rpm. This was ostensibly for slightly more responsive SST when going WOT standing-start. With my new RAX Fast Logging, I can't see this actually improving anything, so... gone.
As you can see, this is mostly about P050B and 2013.
PLEASE double-check your selection - stockpill vs. boostpill, 91oct vs. 93oct, etc. All the ROMs are in one zipfile, so choose carefully.
Cheers,
Rich