2009 Lancer Ralliart - GST Basemap
#4908
Hey guys I want to flash my friends 2013 AU Ralliart with the stock pill 98ron GST tune, But I don't see a file for the AUS 2013 98ron stock pill for Ralliart, which one do I use? Thanks in advance.
#4909
Evolved Member
The good news is... I'm working on the ROM code patches required for 2012/2013 AUS/EDM right now. The general patch generation system is built and ready, and a few people are testing them in various ROMs.
Once I have the patches, I'll need to research up the AUS/EDM tables and other items.
Then, I'll finally be able to make 2012/2013 GST Base Maps.
So watch this space.
Rich
#4910
Wassup guys.
Very grateful for the free tune's posted by GST. The directions and the original post seem pretty self explanatory, but what throws me off is that it constantly says "Stock RA + ... + ...." on the sections. I just want to make sure that I am in the right direction.
I currently have an AMS Boost Pill, Ultimate Racing Turbo Back Exhaust, and AEM Cold Air Intake ready to install into my '09 Ralliart. I currently use 91 Octane (Highest i can find in my current location of West Texas).
Does this mean i should follow the guideline below with the basemap? I should be on the right track but I'm also looking for experienced peer approval. Thanks!
Very grateful for the free tune's posted by GST. The directions and the original post seem pretty self explanatory, but what throws me off is that it constantly says "Stock RA + ... + ...." on the sections. I just want to make sure that I am in the right direction.
I currently have an AMS Boost Pill, Ultimate Racing Turbo Back Exhaust, and AEM Cold Air Intake ready to install into my '09 Ralliart. I currently use 91 Octane (Highest i can find in my current location of West Texas).
Does this mean i should follow the guideline below with the basemap? I should be on the right track but I'm also looking for experienced peer approval. Thanks!
Stock RA + BoostPill upgrade + TBE + AEM Intake:= BoostPill Upgrade and a Turbo Back Exhaust system plus an AEM intake. This means the AEM intake for the Ralliart ONLY. No other full intakes will work correctly with this base map!
------------------------------------------------------------------------------------------------------
Stock RA + BoostPill upgrade + TBE + AEM Intake:
2009 USDM/CADM - 91 oct - BoostPill - TBE - AEM Intake - V3.1
------------------------------------------------------------------------------------------------------
Stock RA + BoostPill upgrade + TBE + AEM Intake:
2009 USDM/CADM - 91 oct - BoostPill - TBE - AEM Intake - V3.1
#4911
Evolved Member
Wassup guys.
Very grateful for the free tune's posted by GST. The directions and the original post seem pretty self explanatory, but what throws me off is that it constantly says "Stock RA + ... + ...." on the sections. I just want to make sure that I am in the right direction.
I currently have an AMS Boost Pill, Ultimate Racing Turbo Back Exhaust, and AEM Cold Air Intake ready to install into my '09 Ralliart. I currently use 91 Octane (Highest i can find in my current location of West Texas).
Does this mean i should follow the guideline below with the basemap? I should be on the right track but I'm also looking for experienced peer approval. Thanks!
Very grateful for the free tune's posted by GST. The directions and the original post seem pretty self explanatory, but what throws me off is that it constantly says "Stock RA + ... + ...." on the sections. I just want to make sure that I am in the right direction.
I currently have an AMS Boost Pill, Ultimate Racing Turbo Back Exhaust, and AEM Cold Air Intake ready to install into my '09 Ralliart. I currently use 91 Octane (Highest i can find in my current location of West Texas).
Does this mean i should follow the guideline below with the basemap? I should be on the right track but I'm also looking for experienced peer approval. Thanks!
Rich
#4914
Okay, this is my first post.
As of right now I have a panel filter and upper intercooler pipe. But would these mods be safe with the stock RA base map as well as the Stock RA + BoostPill upgrade? I know it says "A stock RA with no modifications" but I assume there must be some head room for minor mods. Also ultimately, if I add an EVO X fmic in the future, will it lean out my AFR or would it just help in preventing heat soak and increased MAF temps.
Trying to learn as much as I can about how each mod affects the engine before load up the base map.
As of right now I have a panel filter and upper intercooler pipe. But would these mods be safe with the stock RA base map as well as the Stock RA + BoostPill upgrade? I know it says "A stock RA with no modifications" but I assume there must be some head room for minor mods. Also ultimately, if I add an EVO X fmic in the future, will it lean out my AFR or would it just help in preventing heat soak and increased MAF temps.
Trying to learn as much as I can about how each mod affects the engine before load up the base map.
#4915
Panel filter, UICP, and FMIC will not require a tune, or any changes to a basemap tune. A catback exhaust is also fine.
If you're serious about modding and tuning your car, get a wideband AFR gauge. It's the only way to truly know if you're running lean or rich, and by how much.
If you're serious about modding and tuning your car, get a wideband AFR gauge. It's the only way to truly know if you're running lean or rich, and by how much.
#4917
Hello All
New to this thread. Many thanks to all who have made this amazing basemap.
Just a Quick one on the Aus Ralliart.
I have a 2014 Ralliart and have been using the 2011 AUDM tune for a year or so now with no problems.
Can someone tell me if there are any problems with doing this?
All I had to do was edit the Rom in ecu flash to read my rom number.
the first four digits in the roms are the same and it seems to work fine.
New to this thread. Many thanks to all who have made this amazing basemap.
Just a Quick one on the Aus Ralliart.
I have a 2014 Ralliart and have been using the 2011 AUDM tune for a year or so now with no problems.
Can someone tell me if there are any problems with doing this?
All I had to do was edit the Rom in ecu flash to read my rom number.
the first four digits in the roms are the same and it seems to work fine.
#4918
Evolved Member
Hello All
New to this thread. Many thanks to all who have made this amazing basemap.
Just a Quick one on the Aus Ralliart.
I have a 2014 Ralliart and have been using the 2011 AUDM tune for a year or so now with no problems.
Can someone tell me if there are any problems with doing this?
All I had to do was edit the Rom in ecu flash to read my rom number.
the first four digits in the roms are the same and it seems to work fine.
New to this thread. Many thanks to all who have made this amazing basemap.
Just a Quick one on the Aus Ralliart.
I have a 2014 Ralliart and have been using the 2011 AUDM tune for a year or so now with no problems.
Can someone tell me if there are any problems with doing this?
All I had to do was edit the Rom in ecu flash to read my rom number.
the first four digits in the roms are the same and it seems to work fine.
Rich