2009 Lancer Ralliart - GST Basemap
Jul 9, 2010, 09:02 AM
#616
Evolving Member
iTrader: (1)
Join Date: Jan 2010
Location: Alberta / Saskatchewan
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Hi I am running the 91 oct GST AUS basemap with a stock 08 sportback (K&N panel filter only mod), it seems to run OK, but in Oz we have 98 oct fuel, I am not sure if octanes are octanes, but what could be done to take advantage of this fuel if it is less prone to detonation?
I also am having no luck logging ANY mode 23 data, it is all wrong eg RPM 35550, etc CAN data seems OK but not exact. The stock INTERNAL ID: 53610010 which seem quite a bit different to the USDM models.
Also as soon as I start logging in Mode 23, the data freezes, I suppose because its out of range.
Any Ideas??
I also am having no luck logging ANY mode 23 data, it is all wrong eg RPM 35550, etc CAN data seems OK but not exact. The stock INTERNAL ID: 53610010 which seem quite a bit different to the USDM models.
Also as soon as I start logging in Mode 23, the data freezes, I suppose because its out of range.
Any Ideas??
Jul 9, 2010, 09:43 AM
#617
Account Disabled
iTrader: (8)
Join Date: Sep 2007
Location: Hayward
Posts: 3,366
Likes: 0
Received 0 Likes
on
0 Posts
Hi I am running the 91 oct GST AUS basemap with a stock 08 sportback (K&N panel filter only mod), it seems to run OK, but in Oz we have 98 oct fuel, I am not sure if octanes are octanes, but what could be done to take advantage of this fuel if it is less prone to detonation?
I also am having no luck logging ANY mode 23 data, it is all wrong eg RPM 35550, etc CAN data seems OK but not exact. The stock INTERNAL ID: 53610010 which seem quite a bit different to the USDM models.
Also as soon as I start logging in Mode 23, the data freezes, I suppose because its out of range.
Any Ideas??
I also am having no luck logging ANY mode 23 data, it is all wrong eg RPM 35550, etc CAN data seems OK but not exact. The stock INTERNAL ID: 53610010 which seem quite a bit different to the USDM models.
Also as soon as I start logging in Mode 23, the data freezes, I suppose because its out of range.
Any Ideas??
You need to enable Mode 23 to log via evoscan Mode 23
- Bryan
Jul 9, 2010, 07:28 PM
#618
Newbie
Join Date: Jul 2010
Location: Brisbane, Australia
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I am using Evoscan 2.7. 0070
I thought this version was pre-enabled to use mode 23 when using 'Mode 23 USA RA EVO X' ecu selection.
When I looked at the other postings with XML code for the various ROMS, I could not see one which suited by ROM ID.
Thanks for the info regarding Fuel types I am infact using the 93 OCT map, guess thats the type of mistake you make at 1am after finishing work
I thought this version was pre-enabled to use mode 23 when using 'Mode 23 USA RA EVO X' ecu selection.
When I looked at the other postings with XML code for the various ROMS, I could not see one which suited by ROM ID.
Thanks for the info regarding Fuel types I am infact using the 93 OCT map, guess thats the type of mistake you make at 1am after finishing work
Jul 10, 2010, 06:34 AM
#619
Evolving Member
Join Date: Jan 2010
Location: Melbourne, Australia
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Hi Ifv - I'm a fellow Ralliart owner in Oz, down in Melbourne.
My car runs the GST 93 Oct Cold Region tune with boost pill. I run the cold region tune, because my car was overboosting on the standard tune, even on a warm day.
Our 98 Octane is the same as US 93 (they simple measure the octane differently to us).
Mode 23 is enabled in our tune, but EvoScan don't have Mode23 logging for AUSDM Ralliarts yet - I've asked them a couple of times, but they mostly focus on Evos. I've been told Tephra on this forum can help, and he is in Oz too, but so far he hasn't responded.
My car runs the GST 93 Oct Cold Region tune with boost pill. I run the cold region tune, because my car was overboosting on the standard tune, even on a warm day.
Our 98 Octane is the same as US 93 (they simple measure the octane differently to us).
Mode 23 is enabled in our tune, but EvoScan don't have Mode23 logging for AUSDM Ralliarts yet - I've asked them a couple of times, but they mostly focus on Evos. I've been told Tephra on this forum can help, and he is in Oz too, but so far he hasn't responded.
Jul 10, 2010, 06:51 AM
#621
Newbie
Join Date: Jul 2010
Location: Brisbane, Australia
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Jul 10, 2010, 11:27 PM
#622
Evolving Member
Join Date: Jan 2010
Location: Melbourne, Australia
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Tephra - can't PM you, your storage is full. PM me your email address and I will send an AUSDM 2008/09 Ralliart Rom for Evoscan.
Ifv - Of course they are my wheels They are 19in G-Max Kazei Gold. Check out my project thread in Show and Shine section: Blue on Gold Project.
Ifv - Of course they are my wheels
They are 19in G-Max Kazei Gold. Check out my project thread in Show and Shine section: Blue on Gold Project.
Jul 11, 2010, 02:30 PM
#624
Evolved Member
iTrader: (14)
Join Date: Dec 2003
Location: Philly/Jersey
Posts: 1,831
Likes: 0
Received 0 Likes
on
0 Posts
BRYAN THANK YOU VERY MUCH!!!
The updated 93 boost pill map is awesome!!!
I don't know what you changed, but the new map feels a lot better!
Did you play with the SST settings? My first gear engagement is greatly improved. Plus its running a lot smoother too!!
The updated 93 boost pill map is awesome!!!
I don't know what you changed, but the new map feels a lot better!
Did you play with the SST settings? My first gear engagement is greatly improved. Plus its running a lot smoother too!!
Jul 11, 2010, 05:29 PM
#626
Evolved Member
iTrader: (14)
Join Date: Dec 2003
Location: Philly/Jersey
Posts: 1,831
Likes: 0
Received 0 Likes
on
0 Posts
Well, I read from the first post that he edited.
"UPDATE: 2009-2010 USDM/CADM and AUS 91 oct basemaps, 2009 USDM/CADM 93 oct basemaps!"
I loaded it in and felt a difference.
2009 means 2009 ralliart.
2010 mean 2010 ralliart.
Then you have USDM/CA and AUS.
"UPDATE: 2009-2010 USDM/CADM and AUS 91 oct basemaps, 2009 USDM/CADM 93 oct basemaps!"
I loaded it in and felt a difference.
2009 means 2009 ralliart.
2010 mean 2010 ralliart.
Then you have USDM/CA and AUS.
Jul 11, 2010, 06:16 PM
#628
Evolved Member
Join Date: May 2009
Location: Eastern NC
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
The maps are dated 11/05/09, so I don't think they have been updated recently. I think the post update was when he added the 1/4-mile times.
Jul 12, 2010, 06:29 AM
#630
Evolved Member
iTrader: (14)
Join Date: Dec 2003
Location: Philly/Jersey
Posts: 1,831
Likes: 0
Received 0 Likes
on
0 Posts
Well, I'm going crazy then. hahahaha!
I loaded the map again. It has the same filename too because the old one was on my desktop.
It's pretty funny. Everything drives better after I reflashed it with the map.
I loaded the map again. It has the same filename too because the old one was on my desktop.
It's pretty funny. Everything drives better after I reflashed it with the map.