2009 Lancer Ralliart - GST Basemap
Hi I am running the 91 oct GST AUS basemap with a stock 08 sportback (K&N panel filter only mod), it seems to run OK, but in Oz we have 98 oct fuel, I am not sure if octanes are octanes, but what could be done to take advantage of this fuel if it is less prone to detonation?
I also am having no luck logging ANY mode 23 data, it is all wrong eg RPM 35550, etc CAN data seems OK but not exact. The stock INTERNAL ID: 53610010 which seem quite a bit different to the USDM models.
Also as soon as I start logging in Mode 23, the data freezes, I suppose because its out of range.
Any Ideas??
I also am having no luck logging ANY mode 23 data, it is all wrong eg RPM 35550, etc CAN data seems OK but not exact. The stock INTERNAL ID: 53610010 which seem quite a bit different to the USDM models.
Also as soon as I start logging in Mode 23, the data freezes, I suppose because its out of range.
Any Ideas??
Hi I am running the 91 oct GST AUS basemap with a stock 08 sportback (K&N panel filter only mod), it seems to run OK, but in Oz we have 98 oct fuel, I am not sure if octanes are octanes, but what could be done to take advantage of this fuel if it is less prone to detonation?
I also am having no luck logging ANY mode 23 data, it is all wrong eg RPM 35550, etc CAN data seems OK but not exact. The stock INTERNAL ID: 53610010 which seem quite a bit different to the USDM models.
Also as soon as I start logging in Mode 23, the data freezes, I suppose because its out of range.
Any Ideas??
I also am having no luck logging ANY mode 23 data, it is all wrong eg RPM 35550, etc CAN data seems OK but not exact. The stock INTERNAL ID: 53610010 which seem quite a bit different to the USDM models.
Also as soon as I start logging in Mode 23, the data freezes, I suppose because its out of range.
Any Ideas??
You need to enable Mode 23 to log via evoscan Mode 23
- Bryan
Thanks, I am using Evoscan 2.7. 0070
I thought this version was pre-enabled to use mode 23 when using 'Mode 23 USA RA EVO X' ecu selection.
When I looked at the other postings with XML code for the various ROMS, I could not see one which suited by ROM ID.
Thanks for the info regarding Fuel types I am infact using the 93 OCT map, guess thats the type of mistake you make at 1am after finishing work
I thought this version was pre-enabled to use mode 23 when using 'Mode 23 USA RA EVO X' ecu selection.
When I looked at the other postings with XML code for the various ROMS, I could not see one which suited by ROM ID.
Thanks for the info regarding Fuel types I am infact using the 93 OCT map, guess thats the type of mistake you make at 1am after finishing work
Hi Ifv - I'm a fellow Ralliart owner in Oz, down in Melbourne.
My car runs the GST 93 Oct Cold Region tune with boost pill. I run the cold region tune, because my car was overboosting on the standard tune, even on a warm day.
Our 98 Octane is the same as US 93 (they simple measure the octane differently to us).
Mode 23 is enabled in our tune, but EvoScan don't have Mode23 logging for AUSDM Ralliarts yet - I've asked them a couple of times, but they mostly focus on Evos. I've been told Tephra on this forum can help, and he is in Oz too, but so far he hasn't responded.
My car runs the GST 93 Oct Cold Region tune with boost pill. I run the cold region tune, because my car was overboosting on the standard tune, even on a warm day.
Our 98 Octane is the same as US 93 (they simple measure the octane differently to us).
Mode 23 is enabled in our tune, but EvoScan don't have Mode23 logging for AUSDM Ralliarts yet - I've asked them a couple of times, but they mostly focus on Evos. I've been told Tephra on this forum can help, and he is in Oz too, but so far he hasn't responded.
Tephra - can't PM you, your storage is full. PM me your email address and I will send an AUSDM 2008/09 Ralliart Rom for Evoscan.
Ifv - Of course they are my wheels
They are 19in G-Max Kazei Gold. Check out my project thread in Show and Shine section: Blue on Gold Project.
Ifv - Of course they are my wheels
They are 19in G-Max Kazei Gold. Check out my project thread in Show and Shine section: Blue on Gold Project.
BRYAN THANK YOU VERY MUCH!!!
The updated 93 boost pill map is awesome!!!
I don't know what you changed, but the new map feels a lot better!
Did you play with the SST settings? My first gear engagement is greatly improved. Plus its running a lot smoother too!!
The updated 93 boost pill map is awesome!!!
I don't know what you changed, but the new map feels a lot better!
Did you play with the SST settings? My first gear engagement is greatly improved. Plus its running a lot smoother too!!
Well, I read from the first post that he edited.
"UPDATE: 2009-2010 USDM/CADM and AUS 91 oct basemaps, 2009 USDM/CADM 93 oct basemaps!"
I loaded it in and felt a difference.
2009 means 2009 ralliart.
2010 mean 2010 ralliart.
Then you have USDM/CA and AUS.
"UPDATE: 2009-2010 USDM/CADM and AUS 91 oct basemaps, 2009 USDM/CADM 93 oct basemaps!"
I loaded it in and felt a difference.
2009 means 2009 ralliart.
2010 mean 2010 ralliart.
Then you have USDM/CA and AUS.
the last edit date is july 7th 2010, .... hmmmm bryan did u ninja update maps on us?
The maps are dated 11/05/09, so I don't think they have been updated recently. I think the post update was when he added the 1/4-mile times.
Well, I'm going crazy then. hahahaha!
I loaded the map again. It has the same filename too because the old one was on my desktop.
It's pretty funny. Everything drives better after I reflashed it with the map.
I loaded the map again. It has the same filename too because the old one was on my desktop.
It's pretty funny. Everything drives better after I reflashed it with the map.



