Notices

2009 Lancer Ralliart - GST Basemap

Thread Tools
 
Search this Thread
 
Old Aug 24, 2010 | 04:53 AM
  #901  
jkennedy293's Avatar
Evolved Member
 
Joined: May 2009
Posts: 844
Likes: 0
From: Eastern NC
Originally Posted by aznnightkidz
I received my brand new tactrix and I pluged it in but no lights or any thing I tried every way possible.turned the key on access and ignition no lights please if any one can enlighten me thanks
Did you plug the other end of the cable into your laptop?
Reply
Old Aug 24, 2010 | 05:09 AM
  #902  
sxers2k8's Avatar
Newbie
 
Joined: May 2010
Posts: 9
Likes: 0
From: PA
Originally Posted by jkennedy293
Did you plug the other end of the cable into your laptop?
Should have lights even when not plugged in to the laptop, it might be defective if the laptop isn't picking it up either.
Reply
Old Aug 24, 2010 | 06:17 AM
  #903  
Bom's Evo's Avatar
Evolved Member
iTrader: (14)
 
Joined: Dec 2003
Posts: 1,831
Likes: 0
From: Philly/Jersey
Originally Posted by Skym
Thanks for the great V2 revised maps!! Shifts are a lot smoother than the first V2 for sure!!
You revised V2 again to fix the shifting problem people were having??
Reply
Old Aug 24, 2010 | 06:17 AM
  #904  
aznnightkidz's Avatar
Newbie
 
Joined: Jul 2010
Posts: 52
Likes: 0
From: Brooklyn
Originally Posted by jkennedy293
Did you plug the other end of the cable into your laptop?
Yea I plugged it in and even switched to a new usb cables tried it not plugged in. So frustrating I emailed tactrix and waiting for their response
Reply
Old Aug 24, 2010 | 06:45 AM
  #905  
aznnightkidz's Avatar
Newbie
 
Joined: Jul 2010
Posts: 52
Likes: 0
From: Brooklyn
Anyone kind enough to post their method of connecting the tactrix? Thanks
Reply
Old Aug 24, 2010 | 06:58 AM
  #906  
buddy712's Avatar
Newbie
 
Joined: Feb 2010
Posts: 20
Likes: 0
From: Chicago, il
Originally Posted by aznnightkidz
Yea I plugged it in and even switched to a new usb cables tried it not plugged in. So frustrating I emailed tactrix and waiting for their response

Be sure you install the driver from the tactrix site. I had the same issue. Its the Driver and J2534 DLL
Reply
Old Aug 24, 2010 | 07:15 AM
  #907  
aznnightkidz's Avatar
Newbie
 
Joined: Jul 2010
Posts: 52
Likes: 0
From: Brooklyn
Originally Posted by buddy712
Be sure you install the driver from the tactrix site. I had the same issue. Its the Driver and J2534 DLL
Thanks you I'll try that out hopefully that's what I'm missing
Reply
Old Aug 24, 2010 | 09:09 AM
  #908  
EvoOtto's Avatar
Evolving Member
iTrader: (2)
 
Joined: Nov 2005
Posts: 406
Likes: 0
From: Clifton Park, NY
Has anyone ever experienced a weird shift between 2nd and 3rd gear at moderate throttle using auto normal mode. It almost feels like it pauses or slips for a second or two. (which is an eternity with our tc-sst's LOL I have the 93 oct. without upgraded boost pill.
Reply
Old Aug 24, 2010 | 09:44 AM
  #909  
mikesim's Avatar
Evolving Member
 
Joined: Jun 2010
Posts: 338
Likes: 0
From: Winnipeg, Canada
Originally Posted by EvoOtto
Has anyone ever experienced a weird shift between 2nd and 3rd gear at moderate throttle using auto normal mode. It almost feels like it pauses or slips for a second or two. (which is an eternity with our tc-sst's LOL I have the 93 oct. without upgraded boost pill.
read the last ten pages or so. i think there's been a few posts.
Reply
Old Aug 24, 2010 | 09:45 AM
  #910  
DaJackson's Avatar
Evolved Member
iTrader: (4)
 
Joined: Apr 2010
Posts: 568
Likes: 0
From: Baton Rouge
Originally Posted by EvoOtto
Has anyone ever experienced a weird shift between 2nd and 3rd gear at moderate throttle using auto normal mode. It almost feels like it pauses or slips for a second or two. (which is an eternity with our tc-sst's LOL I have the 93 oct. without upgraded boost pill.
Are you on the 8/15 map or an earlier one?
Reply
Old Aug 24, 2010 | 10:48 AM
  #911  
toredefine's Avatar
Evolved Member
iTrader: (6)
 
Joined: Jun 2009
Posts: 549
Likes: 0
From: Detroit, MI USA
My car was flashed last night with the V2 93octane without boost pill map. When I go WOT, my AFR's read at around 13.0:1 and even reads slightly higher. Is that right? When my car was running on the stock maps, I would see around 11.0:1 AFR readings at WOT.
Reply
Old Aug 24, 2010 | 10:51 AM
  #912  
jkennedy293's Avatar
Evolved Member
 
Joined: May 2009
Posts: 844
Likes: 0
From: Eastern NC
Originally Posted by toredefine
My car was flashed last night with the V2 93octane without boost pill map. When I go WOT, my AFR's read at around 13.0:1 and even reads slightly higher. Is that right? When my car was running on the stock maps, I would see around 11.0:1 AFR readings at WOT.
Do you have any mods?
Reply
Old Aug 24, 2010 | 10:55 AM
  #913  
GST Motorsports's Avatar
Account Disabled
iTrader: (8)
 
Joined: Sep 2007
Posts: 3,366
Likes: 2
From: Hayward
Originally Posted by toredefine
My car was flashed last night with the V2 93octane without boost pill map. When I go WOT, my AFR's read at around 13.0:1 and even reads slightly higher. Is that right? When my car was running on the stock maps, I would see around 11.0:1 AFR readings at WOT.
Sounds like you have a bad fuel pump relay, unless your wideband is incorrect.

I would stop going WOT until you figure it out.

- Bryan
Reply
Old Aug 24, 2010 | 11:03 AM
  #914  
toredefine's Avatar
Evolved Member
iTrader: (6)
 
Joined: Jun 2009
Posts: 549
Likes: 0
From: Detroit, MI USA
Originally Posted by jkennedy293
Do you have any mods?
Just these:
Evo X IC and UICP
COBB 3inch downpipe (without the O2 housing)
HKS box filter



Originally Posted by GST Motorsports
Sounds like you have a bad fuel pump relay, unless your wideband is incorrect.

I would stop going WOT until you figure it out.

- Bryan
I've got the blue relay, which was replaced about two months ago. Should I order another one and replace it anyway? Also, how do I know if my wideband is reading incorrectly? And if it is, what do I do to correct the problem? I've got the AEM UEGO Wideband, and it was just installed about two months ago, as well.

I know you're a busy guy as it is, Bryan. So, I wouldn't mind if someone else chimed in here to help me out if need be. I accept PMs Thanks guys and thanks Bryan.
Reply
Old Aug 24, 2010 | 12:49 PM
  #915  
gloom's Avatar
Evolving Member
 
Joined: May 2010
Posts: 244
Likes: 0
From: sweden
How close to a stock X is the ralliart with the boostpill+ecu upgrade?

I'm new to tuning and wondering a bit about the Dyno charts in the first post.
It reads 215 total horse power maximum for the stock engine. So 25 HP is lost to the wheels as it's stated to have 240 HP?

So with the boost pill it's only 233 HP, still down 7 from whats stated on the "brochure"?

Please clarify for a newbie. I'm really happy for the baseflash and I'm using the one without boostpill. I can feel a difference in power, however when someone ask me how much of a gain the flash did I have no clue. If i would say it's 225 hp (as the chart state with the basemap with stockpill) I'm pretty sure they would wonder what the heck I'm talking about as it's supposed to be 240 original.

Sorry if I'm a complete newbie but I really got into cars late but my interest is ever growing.

//Toby
Reply



All times are GMT -7. The time now is 06:46 PM.