Using 92 should be fine since you are going higher in octane than the basemap so you would just run a little richer (as opposed to running too lean which would be bad).

 

Hi Elick

I did it....it's working perfectly.

Claudio

 

Great. Are you used with or without pill version? I think I'll try it soon. Is it any way to get .xml file for this rom to view it in ecuflash? Thanks.

 

Hi!

I just got my tactrix cable.
Do you still want to check that original ROM off my car??
So I´ll be sure then that your basemap is suitable for my car.
Still waiting for your boost pill, but could use stock pill map if it´s ok.

 

Yes please

- bryan

 

I had this same issue yesterday as well. I drove to work, let the car sit outside in the 97 degree sun for 8 hours, got in to go home, and had issues starting. I let it sit for a minute and tried again. This time it started up with no issues and ran fine for the rest of the day.

 

Where I´m going to send it?
Your email or somewhere else??

 

I've had many hot start issues with my Ralliart too. Its not GST tune related as I've had this issues from day one when my car was stock. I've talked to mistubishi and know one knows why and it seems the EVO has the same problem too.

Some people think its related to their phone and keyless entry pad. By swapping pockets and keeping their phone in a different pocket from the pad they them seem to have elimated it.

 

After save your stock ECU Rom can you burn it to a disc incase your laptop ever bites the dust or gets a virus?

 

It's not related to the keyless entry pad, because mine does not have this. Also, in my case, I could hear the starter working... But it was like the engine did not have gaz. The same situation you'd get if you fuel pump would be defective but, the pump usually works perfectly.

And it's not related to the GST map since I've been having this issue even before I put the GST map.

 

soo it should be fine with v2 for winter? or will there be a v3?

 

I tried one basemap and now that check engine light is on.
Can I clear dtc with ecuflash or do I need to buy evoscan??

 

The ECU light will come on everytime you change maps, unless you clear the code once your done.

After writing the map click ECU in the menu bar then click Clear DTCs. That will clear the code. The one time I forgot to do it the light went away after about 30 min of driving.

 

I work for a Mitsubishi dealership and spoke to one of our service writers. He told me there is an update to our ECU. Also he mentioned that after a hard rain he has seen this issue before as well. Hot and cold weather. He did the ecu flash and replaced 5 relays under warranty. The "data file" as he called it needs to be "CD0308" or newer. Car needs to be built before Nov. 19th 2009. If not then they reflash it to the newest one. Labor op's are 8627A024 and 13850191. Hope this helps.

 

Well GST did a great job and got my boost pill here today! That was fast so it seems like they have their act together now. I would recommend them!

Now another issue Tatrix! I ordered my cable on tuesday. I still do not have it! USPS was 2-3 days so I figured if anything they still deliver on saturday so that will give them an extra day. Well still nothing. I honestly think they have the worst customer service ever. I have called countless number of times without anyone ever picking up. I don't even know if they have a live person you can talk to it always just gets sent to voice mail. I have also emailed and nothing. I didn't go Fed Ex because they said 2-3 days for shipping. I don't think it should really matter because if that is what they advertise they should make it happen.

How long did it take all of you guys?

Great job to GST for being on time. Now it sucks though because I have to look at the boost pill and cannot install

Anyone in the KS area with a tatrix? Thanks for letting me rant LOL.