ay guys i just got my hks ssqv3 today..i plan on VTA when i put it on because i am getting a custom tune right after i install it.. now wut do i need to block off the recurculatiing hose thats connected to the intake??? i cnt do anything with it right now because i dont have the recurculatiing peices any help?
also when im going to tune it do i need anything else liek a boost pill or a boost controller?

 

SST's don't like the BOV setup full atmo...............
I have a SSQV V1 recirc with no issues (no tune and been fine for 9 months).

 

^True! I just learned this myself I have a GFB stealth fx on the way and I was told you gotta go at least 50/50 and thats kinda pushing it.

 

if you got the hks ssqv3 bov that was specifically for the ralliart it should come with a plug that blocks that hose..

 

i got the plug for the hose ..but like i said i am planning on getting a custom tune done so the vta hks should be fine after ward

 

of course u have to block it..

 

^^^ i know i had to block it i just ouldnt find the peice that goes in it

 

you can buy a 1" PVC pipe plug from a hardware store they cost 75cents at home depot or lowes or what ever hardware store u have in your area, this is wut i used when i lost my plug for a week and it didn't fail me