Notices
AEM EMS Get tuning help for your AEM EMS system.

Which wires to what on MAP sensor? (pic)

Thread Tools
 
Search this Thread
 
Old Feb 8, 2006 | 03:17 PM
  #1  
Kerr's Avatar
Thread Starter
Fomer Vendor
iTrader: (18)
 
Joined: Sep 2003
Posts: 1,154
Likes: 0
From: Central FL
Which wires to what on MAP sensor? (pic)

Well, the sensor came and I dont have wires or anything to go off of. I had seen a pic of one in a car, but now cant find it. It just came with the clip (pic below) no wires, so I don't know whats what. If someone could help me out that would be great, thanks.


Reply
Old Feb 8, 2006 | 04:01 PM
  #2  
levo2nr's Avatar
Evolved Member
iTrader: (50)
 
Joined: Sep 2005
Posts: 703
Likes: 0
From: pa
is that a gm map
and part number
someone on the forum mit know if u provide the info
Reply
Old Feb 8, 2006 | 04:50 PM
  #3  
Kerr's Avatar
Thread Starter
Fomer Vendor
iTrader: (18)
 
Joined: Sep 2003
Posts: 1,154
Likes: 0
From: Central FL
Yeah, its gm, #12223861
Reply
Old Feb 8, 2006 | 05:06 PM
  #4  
levo2nr's Avatar
Evolved Member
iTrader: (50)
 
Joined: Sep 2005
Posts: 703
Likes: 0
From: pa
from the pic u have up top
left to right is
c- 5 volts -------evo8 harness side- grey-5volts
b- signal---------evo8 harness side-yellow-signal
a- ground-------evo8 harness side-black-ground

if im wrond can someone please correct me
good luck
Reply
Old Feb 9, 2006 | 10:10 AM
  #5  
Kerr's Avatar
Thread Starter
Fomer Vendor
iTrader: (18)
 
Joined: Sep 2003
Posts: 1,154
Likes: 0
From: Central FL
Ok, Is there a way to find out for sure. I don't know how to use a meter to find out.
Reply
Old Feb 9, 2006 | 10:23 AM
  #6  
kcevo's Avatar
Evolved Member
iTrader: (11)
 
Joined: Aug 2003
Posts: 759
Likes: 0
From: Kansas City
Here's a link to confirm what levo2nr has posted above.

http://www.robietherobot.com/storm/mapsensor.htm
Reply
Old Feb 9, 2006 | 11:16 AM
  #7  
levo2nr's Avatar
Evolved Member
iTrader: (50)
 
Joined: Sep 2005
Posts: 703
Likes: 0
From: pa
holyyyy
i was correct on this forum for the fisrt time......

j/k
thanks kcevo
Reply
Old Feb 9, 2006 | 02:39 PM
  #8  
Kerr's Avatar
Thread Starter
Fomer Vendor
iTrader: (18)
 
Joined: Sep 2003
Posts: 1,154
Likes: 0
From: Central FL
Very cool, thanks.
Reply




All times are GMT -7. The time now is 11:56 PM.