Im wondering how I can setup the AEM for this...

Since its plug and play and is supposed to require nothing in the stock ECU does that mean I can setup like it was the stock solenoid or do I need to change somethings.

All help is appreciated.

 

bump for input

 

The Grimmspeed flows 30% more than the stock unit I believe. So, if you dial back you WGDC 30% that might give you a good start.

 

yes as long as its a 0-5v reference your good to use. The grimspeed is fine. You can also use almost every ebc solenoid for ecu boost through an ems as well