hi gang.. was wondering if anyone knows the voltage to temp scale for the stock water temp sensor!

thanks!

 

If you goto aempower.com and join there forum it has info on the sensors.

 

if you load up the evo base calibration just go look at the iat temp vs voltage table

 

You can use the wizard for the stock sensor. Should be fairly accurate.

 

..

 

Ah, how foolish of me to assume you had an AEM EMS since this was posted in the EMS forum!

At any rate, here is the table from the EMS:

Volts/Temp
0/217
0.16/207
0.31/196
0.47/185
0.62/174
0.78/163
0.94/154
1.09/145
1.25/136
1.40/127
1.56/118
1.72/109
1.87/102
2.03/93
2.18/86
2.34/79
2.50/73
2.65/66
2.81/61
2.96/54
3.12/48
3.28/43
3.43/37
3.59/34
3.74/28
3.90/25
4.06/21
4.21/18
4.37/14
4.52/12
4.68/9
4.84/7
4.99/5