Going to the track tomorrow
Thread Starter
Former Sponsor
iTrader: (73)
Joined: Dec 2005
Posts: 4,668
Likes: 1
From: Ft. Lauderdale, Fl
Going to the track tomorrow
Im going to the track tomorrow..my mods are test pipe/cut out and mbc...right now i have it at 21 pounds... my mph was 108.7.....what do u guys think i should set my goal at as far as mph and in the 1/4 mile.....
2ndly i was thinking about putting in some race gas....we have 93 in fl what octane should i mix with the 93 and how many pounds of boost should i turn it up to.... i plan on going to the track with about 1/8 tank of gas (2 or 3 gallons)
thanks
2ndly i was thinking about putting in some race gas....we have 93 in fl what octane should i mix with the 93 and how many pounds of boost should i turn it up to.... i plan on going to the track with about 1/8 tank of gas (2 or 3 gallons)
thanks
Thread Starter
Former Sponsor
iTrader: (73)
Joined: Dec 2005
Posts: 4,668
Likes: 1
From: Ft. Lauderdale, Fl
ya i ran be4 but had a bad launch and the track was really busy..the place im going to tomorrow is usually empty so i should be able to get as many runs in as i want......what should i do about the race gas? 110 104 116? how much should i mix in with 2 or 3 gallons of 93....and how many pounds should i turn it up 2?
Originally Posted by 4 Wheel Slide
ya i ran be4 but had a bad launch and the track was really busy..the place im going to tomorrow is usually empty so i should be able to get as many runs in as i want......what should i do about the race gas? 110 104 116? how much should i mix in with 2 or 3 gallons of 93....and how many pounds should i turn it up 2?
You can do 24psi on race gas. It doesn't matter what octane you use really. You can't tune for it, so I'd go with the lowest octane race gas they have if I were you. With race gas and extra boost on top of your previous 108.7mph traps, you should be able to get to at least 110mph, which is good for 12.3s driven properly...12.4-12.5 with OK driving.


