I found a local DSM owner selling them. They are in mint condition and hardly have any miles since he was only using them to drag with. I don't think they make this size anymore so they are rare. Since I'm sticking with the 16" slicks, I'll most likely be selling them to help pay for my new motor. They will require 20mm spacers in the front to clear the brembos but will only stick out 3mm more than the factory 8" wheels. I was thinking about using them as winter wheels but thats stupid using these nice wheels for that.

 

Still no times or feedback on these tires. I want to buy drag radials but want to hear something about these first

 

The only feedback I've gotten was from Josh who we just finished up his EVO9 for. He was at the MAP event last week and said he had a 1.4x on the RADIAL!

 

What kind of power was he making?

 

700 on our dyno.

 

Impressive.

 

If any of you are interested in tires and don't want to pay the $95 (typically) shipping charges on them, you can place an order for tires and pay for them, then pick them up at the Shootout in August. Keep it in mind. There is also a tire shop at the race track that can mount and balance them for you.

 

Finally got a chance to go to the track on these slicks and was able to pull 1.5 to 1.6 60 fts all night long. Still trying to get used to launching on slicks so there is def room for improvement. So far i really like them though.

 

You are on the slicks not the radials correct ?? Thanks for the feedback

 

Thanks for the feedback.

For those of you that are interested we will have tires here at the Shootout. We can change them for you or you can have them changed at the track. It will also save you about $95 in shipping fees getting them here.

 

I hope after this event there are more feedback on these M&H Drag radials. I want to make my purchase within the Next 3 weeks and want the best so I'm split between these and the Hoosiers everyone runs.

 

We put a set on my RS this weekend, the slicks, BRAND NEW with the nubs still on the tires. NO burn out, pulled to the line and launched, set a personal best 60' time, un****ingbelievable 1.39!! The slicks work! The radials I am sure are going to be right there with them, I will switch over to those on my own car as soon as we run 8's on the slicks, then I want to do it on a radial.

 

1.39?!?! Nice job DB!

 

Thats insane, I'm pretty sure ill end up buy M&H I always preferred their slick compound from when i raced Hondas. But when it came to radials i always used M/T. The only reason i keep asking is because after these Drag Rad came out I haven't seen any major shops switching to them or even use them which i find strange because coming from a Hondas any time something new like this came out we'd be quick to buy to gain any extra edge at the following event.

 

Those tires look awesome.. i would like to try them one day on my car...