my car only has dynoflash,
i want to set boost at 20 psi
DO I NEED A RE-FLASH OR A WALBRO FUEL PUMP????

 

no - but it wouldn't hurt you to get a walbro pump and a reflash, just for peace of mind

 

thanks alot al

 

is it safe for daily drive, AL?????

 

yes

 

awesome, your da man

 

what kind of fuel are you using? 20psi seems to be a psi too high on 91 octane, i wouldn't go over 19 on that **** water.

 

You can run more boost, but the car will just pull timing and you will end up making less power. Power = max boost your car will run without pulling timing. Like I could run 25 psi and make around 380 hp but it would pull timing after one run. 19 psi on 91 octane sound about right. I run between 19 and 21, but it still pulls timing depending on how hot the car is.

 

i would probably run 2 or 3 gallons of at least 100 octane w/the 91 so timing won't pull as much. it might be better on your motor. unless you like replacing things...

 

thank you guys, really appreciate all your 2 cents
what is pull timing??

 

BUMP i want to know what's pull timing!!!!!!!!!!!!!!

 

im surprised you dont have a walbro pump already..should be your first mod

 

Do a search man, basically timing is what keeps your motor safe, how far it advances it = more power but the stock ECU will pull it away if it detects knock.

 

When your knock sensor senses some knock activity it tells your ECU to retard ignition timing. It's there to save ur motor

 

still don't get it, how can i tell if time pull or not?