Dynoflash is the best
Dynoflash is the best
Hey guys, I went to Pruven tonight and Al did his "boost control" flash on my previously base flashed otherwise stock evo ( well, a K & N panel filter). Anyone considering a flash should get this flash NOW. I liked my car with the base flash, but now it is incredible. We put a boost gauge in the car to see what boost it's running, and we saw a consistant 20 lbs pull after pull. I have a stock evo that runs like a bat out of hell thanks to Al's new boost control flash ( or whatever he decides to name it). Thanks again Al, I will be back for my new power fix soon.
Stay safe,
Punisher
Stay safe,
Punisher
Last edited by Punisherofall; Mar 9, 2005 at 06:55 PM.
My flash is the dynoflash mail in flash, but now Al figured out how to control the boost solenoid with this flash. I have not been on the dyno, but my car is making more power with this new boost control method according to my butt dyno ( and the boost gauge) over my old base flash. BTW 2nd gear spiked to 20 lbs and fell to 17-18 lbs from 6000-7000 rpm while 3rd saw 20 lbs and held to 6000 then slowly bled to 18 at redline. Much better than stock. Again, I don't know what Al is going to call this flash, but it is exactly what I wanted in the car sice I bought it. Thanks Al I have a "new" car again.
Stay safe,
Punisher
Stay safe,
Punisher
Originally Posted by Punisherofall
My flash is the dynoflash mail in flash, but now Al figured out how to control the boost solenoid with this flash. I have not been on the dyno, but my car is making more power with this new boost control method according to my butt dyno ( and the boost gauge) over my old base flash. BTW 2nd gear spiked to 20 lbs and fell to 17-18 lbs from 6000-7000 rpm while 3rd saw 20 lbs and held to 6000 then slowly bled to 18 at redline. Much better than stock. Again, I don't know what Al is going to call this flash, but it is exactly what I wanted in the car sice I bought it. Thanks Al I have a "new" car again.
Stay safe,
Punisher
Stay safe,
Punisher
Yes, it is cheaper than a boost controller and a flash, the stock ecu controls the boost, so you don't need a boost controller. It's perfect for someone like myself who wants to keep the car stock appearing for now. I would venture to guess my "stock" evo is putting out 270-280 wheel horsepower now. It runs absolutely great now!
Stay safe,
Punisher
Stay safe,
Punisher
Trending Topics
oh, so you were the guiney pig for a new flash on your cars engine management system to save a few bucks? okeydoke
you have stock exhaust? if so, you need to dial those hopefull dyno numbers down a bit.
you have stock exhaust? if so, you need to dial those hopefull dyno numbers down a bit.
Originally Posted by Punisherofall
Yes, it is cheaper than a boost controller and a flash, the stock ecu controls the boost, so you don't need a boost controller. It's perfect for someone like myself who wants to keep the car stock appearing for now. I would venture to guess my "stock" evo is putting out 270-280 wheel horsepower now. It runs absolutely great now!
Stay safe,
Punisher
Stay safe,
Punisher
See if Al will reply, he will tell you the car runs extremely well. GSUJeff, I don't need your opinions, my car, my choice! I trust Al's flashes; yes 270 whp may be a little high, but no need to be an *** or a ***** about it. At any rate the flash works well.
Stay safe,
Punisher
Stay safe,
Punisher
BTW - anyone who wants this flash update who has the mail in flash $199 already can update to this new boost controlling flash ( no name yet ) for FREE - just pay the fed ex fees and its yours
New customers get this included free with the $199 mail in Dyno Flash
This works great - this guys car really is very enjoyable to drive and quick for as car with only a flash. He did not have time to get on the dyno - we will have dyno sheets soon
New customers get this included free with the $199 mail in Dyno Flash
This works great - this guys car really is very enjoyable to drive and quick for as car with only a flash. He did not have time to get on the dyno - we will have dyno sheets soon



Good work Al!