?? on the ecuflash what is the formula to lean out the rpms... is it to add more or subtract more from the table ???

 

adding will lean, decreasing will richen. example, 12.0 down to 11.0 will richen. 10.0 up to 12.0 will lean. good luck!

 

Just like afr's, the bigger the number the leaner it is.

 

thanks nother ??? which way do i need to go if im running too rich with 21psi manuel boost controled... on the high n low load settings??

 

what does this mean?

 

Danger, Will Robinson! Danger!

1. How do you know if you are running "too rich?"

2. Familiarize yourself with the basic concepts of air-fuel ratios before moving on.

A basic user guide to ECUFlash has been posted that I think you will find very helpful.

 

load #1 load #2
86.875 - 500 86.9 -500
88.125 -1000 97.5 -1000
93.75 - 1500 98.8 -1500
105 - 2000 105 -2000
115 - 2500 113.8 -2500
113.75 - 3000 115 -3000
97.5 - 3500 100 -3500
76.875 - 4000 97.5 -4000
75.625 - 4250 76.9 -4250
75.625 - 4500 75.6 -4500
74.375 - 4750 74.4 -4750
60 - 5000 60 - 5000
55 - 5250 55 -5250
50.625 - 5500 50.6 -5500
41.25 - 5750 41.2 -5750
0 - 6000 0 -6000

 

+1

Spend the time at least on the tutorial, and search the forums and might be a good idea to check out AMS tuning tips sticky on their subforum of evom.