injector scaling question
Thread Starter
Evolved Member
iTrader: (1)
Joined: Jan 2004
Posts: 689
Likes: 0
From: Sacramento, CA
injector scaling question
I recently installed 720cc injectors in my 03 evo. I haven't had time to install my wideband yet, but I used another member's reccomended injector scaling and voltage numbers and reflashed my car with evoflash.
In daily driving, I get a few knock counts here and there; with more aggressive driving, my knock counts are getting into double digits.
Its possible that I'm just picking up some artifact, etc, but I want to be safe until I get my wideband hooked up and can do more accurate datalogging.
Would it be and easy and reasonable fix to bring the injector scaling number down a bit towards where it was with the stock injectors to richen things up a bit unitl I get more data?
In daily driving, I get a few knock counts here and there; with more aggressive driving, my knock counts are getting into double digits.
Its possible that I'm just picking up some artifact, etc, but I want to be safe until I get my wideband hooked up and can do more accurate datalogging.
Would it be and easy and reasonable fix to bring the injector scaling number down a bit towards where it was with the stock injectors to richen things up a bit unitl I get more data?
Thread Starter
Evolved Member
iTrader: (1)
Joined: Jan 2004
Posts: 689
Likes: 0
From: Sacramento, CA
Originally Posted by razorlab
You need to make sure your fuel settings are correct as well. Get your wideband hooked up before you flog the car anymore. 
I told you all this in the PM didn't I?

I told you all this in the PM didn't I?

Was gonna PM ya on NCE but it seems to be down...would it be reasonable to lower the injector scaling number a bit (to richen things up and add a bit of safety) until I get the wideband in and the fuel tables adjusted?
Thread
Thread Starter
Forum
Replies
Last Post
R4a2m0o
General Engine Management / Tuning Forum
4
Mar 11, 2011 11:58 AM








