Notices
ECU Flash

Injector scaling/latency for Precision 880cc

Thread Tools
 
Search this Thread
 
Old Apr 26, 2007 | 06:00 PM
  #1  
kmcconn9's Avatar
Thread Starter
Evolved Member
iTrader: (33)
 
Joined: Jun 2005
Posts: 3,044
Likes: 3
From: Hagerstown
Injector scaling/latency for Precision 880cc

Does anybody have a set of 880cc injectors or something similar that would help me out with adjusting the injector scaling/letency so I can get the car to idle so I can get tuned in a couple days.

The injectors are 880cc precision injectors.

Thanks guys
Reply
Old Apr 26, 2007 | 07:23 PM
  #2  
kmcconn9's Avatar
Thread Starter
Evolved Member
iTrader: (33)
 
Joined: Jun 2005
Posts: 3,044
Likes: 3
From: Hagerstown
nobody has these injectors or something similar I take it...
Reply
Old Apr 26, 2007 | 07:34 PM
  #3  
MrEvo2U's Avatar
Newbie
 
Joined: Dec 2004
Posts: 56
Likes: 0
Actually I think a lot of people have them, they just expect you to search and figure out how and why you need to rescale. Figuring it out for yourself, helps explain a lot about the latency, fuel trims, etc. It was a major PIA for me and my fuel trims still aren't that good (latency still off) (hint: I started scaling about 80% of injector size and copied the latency off of the AEM board) Good luck!!
Reply
Old Apr 26, 2007 | 07:43 PM
  #4  
phenem's Avatar
Evolved Member
iTrader: (39)
 
Joined: Jul 2005
Posts: 811
Likes: 4
From: Central PA
I have the PTE 880's and have them set to the following:

Injectors scaled at 750cc

Latency is as follows:

4.6875 3.624
7.03125 1.992
9.375 1.344
11.7188 0.984
14.0625 0.744
16.4062 0.576
18.6768 0.456

Idle is perfect and low, fuel, high is spot on...let me know if it works out for you

~Zach
Reply
Old Apr 26, 2007 | 09:09 PM
  #5  
EVO6RS11's Avatar
Newbie
 
Joined: Dec 2005
Posts: 5
Likes: 0
From: Jamaica
Originally Posted by phenem
I have the PTE 880's and have them set to the following:

Injectors scaled at 750cc

Latency is as follows:

4.6875 3.624
7.03125 1.992
9.375 1.344
11.7188 0.984
14.0625 0.744
16.4062 0.576
18.6768 0.456

Idle is perfect and low, fuel, high is spot on...let me know if it works out for you

~Zach
That's the spirit Zach help a brother out I respect that
Reply
Old Apr 27, 2007 | 04:35 AM
  #6  
kmcconn9's Avatar
Thread Starter
Evolved Member
iTrader: (33)
 
Joined: Jun 2005
Posts: 3,044
Likes: 3
From: Hagerstown
Originally Posted by MrEvo2U
Actually I think a lot of people have them, they just expect you to search and figure out how and why you need to rescale. Figuring it out for yourself, helps explain a lot about the latency, fuel trims, etc. It was a major PIA for me and my fuel trims still aren't that good (latency still off) (hint: I started scaling about 80% of injector size and copied the latency off of the AEM board) Good luck!!
I do understand why they need adjusted, but why would I want to mess with doing all of that the day before I get tuned when I know somebody has something I can use as a reference to get my down the road...

Thanks for your non-informative input though
Reply
Old Apr 27, 2007 | 04:36 AM
  #7  
kmcconn9's Avatar
Thread Starter
Evolved Member
iTrader: (33)
 
Joined: Jun 2005
Posts: 3,044
Likes: 3
From: Hagerstown
Originally Posted by phenem
I have the PTE 880's and have them set to the following:

Injectors scaled at 750cc

Latency is as follows:

4.6875 3.624
7.03125 1.992
9.375 1.344
11.7188 0.984
14.0625 0.744
16.4062 0.576
18.6768 0.456

Idle is perfect and low, fuel, high is spot on...let me know if it works out for you

~Zach
Thank you sir for the informative response. This is EXACTLY what I was looking for and couldn't find searching. All I found was 780 and 1000, so I needed something closer to the 880s to establish a solid starting point.

Thanks again

Last edited by kmcconn9; Apr 27, 2007 at 07:24 AM.
Reply
Old Sep 2, 2007 | 06:52 PM
  #8  
bigric09's Avatar
Evolved Member
iTrader: (37)
 
Joined: Sep 2003
Posts: 3,146
Likes: 2
From: Spec-Ops Motorsports, Fayetteville, NC
i know the feeling, before this i couldnt find the scaling for the 880's only latency values.... thanks man... at least i know i was close i was dead on with my scaling at 750 i guess... my voltages were a hair off
Reply
Old Oct 28, 2007 | 11:30 PM
  #9  
Inprogress's Avatar
Evolved Member
iTrader: (30)
 
Joined: Jun 2004
Posts: 1,947
Likes: 0
From: Houston, TX
subscribed for later use, thanks!
Reply
Old Nov 27, 2009 | 01:45 PM
  #10  
C130flyer's Avatar
Evolving Member
15 Year Member
Photogenic
iTrader: (8)
 
Joined: Jul 2008
Posts: 464
Likes: 1
From: Elizabeth City, NC
subscribed
Reply
Old Nov 27, 2009 | 01:52 PM
  #11  
steadly2004's Avatar
Evolving Member
iTrader: (19)
 
Joined: Jun 2007
Posts: 346
Likes: 0
From: Lincolnton, NC
Originally Posted by MrEvo2U
Actually I think a lot of people have them, they just expect you to search and figure out how and why you need to rescale. Figuring it out for yourself, helps explain a lot about the latency, fuel trims, etc. It was a major PIA for me and my fuel trims still aren't that good (latency still off) (hint: I started scaling about 80% of injector size and copied the latency off of the AEM board) Good luck!!
This is what he was talking about....hence the search comment
https://www.evolutionm.net/forums/ec...upermerge.html
Reply
Old Nov 27, 2009 | 03:28 PM
  #12  
sikwititevo9's Avatar
Evolving Member
iTrader: (10)
 
Joined: Sep 2008
Posts: 145
Likes: 0
From: utah
subscribed
Reply
Old Nov 27, 2009 | 03:35 PM
  #13  
sikwititevo9's Avatar
Evolving Member
iTrader: (10)
 
Joined: Sep 2008
Posts: 145
Likes: 0
From: utah
do i have to do anything to my fuel trims?
Reply
Old Nov 27, 2009 | 06:20 PM
  #14  
black-dsm's Avatar
Newbie
iTrader: (18)
 
Joined: Sep 2007
Posts: 70
Likes: 0
From: Kansas
Originally Posted by steadly2004
This is what he was talking about....hence the search comment
https://www.evolutionm.net/forums/ec...upermerge.html
Do you know that this thread is almost 3 years old
Reply
Old Nov 28, 2009 | 05:29 PM
  #15  
steadly2004's Avatar
Evolving Member
iTrader: (19)
 
Joined: Jun 2007
Posts: 346
Likes: 0
From: Lincolnton, NC
Originally Posted by black-dsm
Do you know that this thread is almost 3 years old
Do latencies change over the years?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nissanfanatic
For Sale/WTB - Engine / Drivetrain / Power
1
Jun 4, 2017 05:06 PM
vipevo9
For Sale/WTB - Engine / Drivetrain / Power
5
May 9, 2012 08:20 AM
miked420
For Sale/WTB - Engine / Drivetrain / Power
4
Sep 21, 2010 05:16 PM
EvoAnthony
ECU Flash
5
Mar 19, 2007 05:41 AM
smokedmustang
General Engine Management / Tuning Forum
5
Aug 4, 2006 08:52 AM




All times are GMT -7. The time now is 09:52 AM.