...mmh... maybe i did something wrong.
With 5690 the immo works and doesn't allow to start the engine.
I'll try on a different T car we have on Tuesday, and i'll let you know the results.

 

...

 

56D2...should work fine. I doublechecked the periphery spreadsheet and those values will work/have worked. Did you remember to use 0x5690 to make it enter it as a hex value?

 

So pretty much if you do the rear 02 delete after the coding in the .xml file, if your periphery0 code reads 0x56DA, and if you also want to remove the immobilizer (and .xml is coded for it) you type in 0x56D0? (No immobilizer/Rear o2)? Thanks!

 

ttt

 

im doing this with 96420007 and i cannot get it to show up in ecuflash. i did it on another rom and it worked, but not this one.

 

where exactly do i put 56D2 code?? which value in ecuflash or in XML?? if xml where exactly in XML??? sorry im new

 

what is your init code?
the location migth be different...

00000FAA .data.w h'56DA
00000FAC .data.w h'56DA
00000FAE .data.w h'56DA
00000FB0 .data.w h'56DA
00000FB2 .data.w h'56DA
00000FB4 .data.w h'56DA
00000FB6 .data.w h'56DA
00000FB8 .data.w h'56D2

 

Is there a hex periphery to disable knock and immobilizer only?

 

I'm going to get this back from the dead, because I can't seem to find it anywhere as to how to disable my immobilizer or change the immobilizer on a new Rom I'm about to flash.

Can someone help, I'm a beginner and I can't see where I need to be to see all this? I already know how to use ECUflash and all just the coding part where is all that written?

Or a tutorial would do I guess...

Thanks

 

what do you want to do , disable immo or change immobiliser code