PATCH: TephraMod V5
#152
Evolved Member
iTrader: (17)
So now getting back into the ECU thing again since the spring is near I have a few questions.
Ive done all of the .xml requirements and the new maps show up on my old .bin file, will I still have to transfer all of my old maps to the new one that I downloaded?
Sorry if this was asked already but didn't see it mentioned.
Ive done all of the .xml requirements and the new maps show up on my old .bin file, will I still have to transfer all of my old maps to the new one that I downloaded?
Sorry if this was asked already but didn't see it mentioned.
Yes they will be offered for IX ROM's too. Not sure if any ROM ID's already listed are for any IX's but I do know you will definitely see some on that list. In order to take advantage of the Map Switching feature, you need some way to switch between maps in the IX's. The IX's that came from the factory with the ISC switch (sorry USDM guys )can just flip from the standard maps and the alt maps via the ISC switch so you really don't need any separate switching device, though some prefer the dedicated switch setup.
The link in my sig shows you how to make your own switching harness or you can just buy one of my pre-made one's if you don't feel like putting on your DIY'r shoes
Last edited by Jack_of_Trades; Mar 20, 2008 at 06:15 PM.
#160
Evolving Member
Join Date: May 2007
Location: Edinburgh, UK
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
I've been trying out 96530006 today and I'm sure there is a problem with Alt Map boost control. I've just switched from using my Apexi AVCR boost controller to try out ECU boost control using the AVCR solenoid. I managed to get the boost pretty steady at 1.65 bar in all gears but when I try alt map with the same settings the boost just goes wild, 1.95bar at 3000RPM in 5th. I've seen it go to 2.2 bar before I've let off the gas. The same thing happens even with reduced duty cycle in Alt Map. I didn't take any logs and I probably won't be able to do any more testing for the next few days as the weather is turning really bad.
#164
Evolving Member
Join Date: May 2007
Location: Europe
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Another 2 questions today for you:
1) What's wrong with RPM in the boost limit table???
2) How to know what map you are running? I found threee states of my ICS light when pressing auto button:
a) flashing slowly
b) constant flashing
c) no light at all
1) What's wrong with RPM in the boost limit table???
2) How to know what map you are running? I found threee states of my ICS light when pressing auto button:
a) flashing slowly
b) constant flashing
c) no light at all