Hi Paul, finally a solution to my problem! I haven't tried it out yet, but I wanted to know where are these two tables found?

"idle error tables "
"idle stability timing control sensitivity "

Thanks a lot!

 

These are for the 94170015 ROM

<table name="Idle Error - Normal" category="Idle" address="434a" type="2D" level="2" scaling="ISCVSteps">
<table name="Idle Error" address="647e" type="X Axis" elements="9" scaling="RPM"/>
</table>

<table name="Idle Error - A/C On" category="Idle" address="435a" type="2D" level="2" scaling="ISCVSteps">
<table name="Idle Error" address="647e" type="X Axis" elements="9" scaling="RPM"/>
</table>


<table name="Idle Stability Timing Control" category="Timing" address="174e" type="2D" level="2" scaling="uint16">
<table name="Settings" type="Static X Axis" elements="3">
<data>Sensitivity</data>
<data>Timing Limit</data>
<data>Untested</data>
</table>
</table>

 

Have u tables for TephaMod v7t6?

 

I had mundo idle issues on this rom coming from 96940011... with idle and AC.
Where I never did before.


Then my AC pump locked up last week. So I just removed AC. Car has never run better.

(41k on the car.)

 

Great solution for not having AC issues ... )))

 

Would you happen to know where I can get the definitions for these tables on the 96940011 ecu?

 

I wish i did...But since you have an VIII you should be able to convert over to the 94170015 ROM rather easily. If you decide to give it a shot....I can hook you up with my ROM in stock form. I have every patch, fix, and finding to date.

Paul

 

Isnt that an 03 rom? I thought the rom had to come from a car that has the acd for it to work properly.

 

My car has been doing this for about a year now....its soo annoying. I have the Cosworth M2's also. Which one of these methods work the best?

 

I like appauledd's method, my car has been staying on with the A/C in use for longer than it ever has. The only thing is I need the "idle error" tables ported over.

 

Hey Paul. Is this what the tables are supposed to look like before they're corrected?



Thanks

 

These are mine. Keep in mind I have the stability raised and have done timing adjustments too.

The picture is a little blurry....

Idle Error AC ON ....0, 1, 2, 3, 4, 5, 6, 7, 8
Idle Error Normal....0, 1, 2, 3, 4, 5, 5, 5, 5

Stability control.... 150, 8, 8

 

You are correct about the ROM..... I didn't realize you have ACD.

You can try the universal ROM 96530006. It is supposed to work on all VIIIs.

I tested it on an 05 VIII .....didn't work for me. Worth a shot though.

 

Stock values

Stability 128, 8, 8

Idle error(s) 0, 1, 2, 3, 4, 4, 4, 4, 4

 

I forgot to ask, where did you get your definitions from? Was it on here? I can't find anything on the idle error tables.